Need advice for new build!

lovelyx

Limp Gawd
Joined
Jan 21, 2005
Messages
164
Hi.

I want to upgrade my computer an assembled three options. I will use the computer 80% of the time for Digital Audio Workstations like Pro Tools, Cubase, FL Studio, etc and the other 20% (around 2-4 hours a week) of the time I want to use it for gaming at 1280x1024. Considering this, which option you consider the best? Also take in mind that I'm currently paying $700 a month for my school and music software is very expensive and I'm not including the price of a new sound card and the price for Mbox2 that I need to use Pro Tools. So price is a big factor here.

Edit: It has been decided, the following build is what I'm going to buy, I'll look for cheaper prices. Any further advice is very welcome, I'll order the pieces next week.

Motherboard Gigabyte GA-965P-DS3 $100
Processor Intel Core 2 Duo E6420 Conroe 2.13GHz $190
Video Card PNY VCG88GTS32XPB $270
Memory Wintec AMPX 2GB DDR2 800 PC6400 $88
Hard Drive Seagate Barracuda 250GB 3.0Gb/s $70
Power Supply Xclio Goodpower 500W ATX $50
Computer Case CHENMING 301KEB-0-AW ATX Mid $36
Total $804

I expect this build to last a year and a half or maybe two years.
 
For what you need, definitely option number one. You can shave at least $100 off the price with better cost-conscious purchases:

ddr2-800 memory should is currently under $100 for 2 gigs. You won't be able to tell a difference with the current memory you're using and you'll be able to overclock the e6420 to 3.2ghz without even overclocking the memory.

8800gts 320mb should run $260 after rebate. evga's isn't that low now, but leadtek is at newegg.

xclio 500w psu for $50 is a much better psu for your money than the one that you posted.

This should bring option #1 down to around $900. Good luck!
 
Thanks! That was the kind of advice I was looking for. I adjusted option 1 and its now almost $100 cheaper.

Any other tips like that are welcome.

I was wondering if an nForce 590 would suit me better than a 680i.
 
I don't think any nForce board is a good idea for option 1. You're definitely not going to need SLI with your setup, so there is no reason to spring for an nForce board (especially the 680i, which is one of the most expensive chipsets on the market.) Save $$ and go for the tried and true Gigabyte DS3, which is one of the best overclockers on the market and probably the most recommended board on HardForum.

Btw, I know this out of the mainstream line of advice, but have you considered an Intel Mac? A well equipped iMac that would surely meet your needs would only be a couple hundred more than option 1 (upgrade to 2 gigs of RAM separately for very little money,) and you wouldn't have to worry about a sound-card either (besides, the m-box is an external sound-card in its own right, which you should be able to use to drive your computer's daily sound, including games, in addition to ProTools.)

I suggest this because audio creation software has known to always be more robust on the Macintosh. I personally have experience with both ProTools and Reason on the Mac and PC, and I've always felt that the Mac versions run better and longer on less powerful hardware. Besides, the vast majority of professional content creation work is done on the Mac anyway, and you would already have the platform required for Logic in case you ever need that tool. Just a thought...

Good luck,

Mark.
 
Thanks, I'll look into the Gigabyte DS3.

I'm planning to buy a Mac in the next six months. ;)
 
I agree, drop to a more affordable board. The DS3 is great, as Mark mentioned, and if you still want an nForce chipset, the MSI P6N SLI-FI is also good. The DS3 may be cheaper at clubit.com instead of newegg, so shop around.

You can save even more money if you go with this ram instead:
$88 - Wintec AMPX 2GB (2x1GB) DDR2-800 3AXT6400C5-2048K
 
Ok, I'll take your word on those rams.

What do you think about the computer case and the hard drive?
 
Back
Top