Heres the biz. I recently bought a watercooling setup cause i wanted to, I also purchased some cosmetic items to spice up the ole PC. Anyway me in my modding genius decided to wire up a switch to control all my lights. This is where the problems begin.
To get power for the lights I have one molex connector with the 12v lead and a ground on it. This plugs into a molex directly from the PSU. I took that 12V lead and ground and spliced em into two seperate leads for each. One set goes to my switch and thus my lights and the other set goes to the power leads of my EXOS. The only problem is I turn on the computer, flick the switch, and the thing shuts off. The switch has to be in the ON position for the computer to even boot. WTF!!!
The other problem I seem to be having (and they may be related) is that I cannot seem to get power to any of my IDE devices. I did change the molex connectors while sleeving and may have inadvertently switched the two black ground leads around a few times.
So whats the diagnosis? I dont think I ruined my PSU but I cant for the life of me get power to the devices. Any help would be appreciated GREATLY!!
To get power for the lights I have one molex connector with the 12v lead and a ground on it. This plugs into a molex directly from the PSU. I took that 12V lead and ground and spliced em into two seperate leads for each. One set goes to my switch and thus my lights and the other set goes to the power leads of my EXOS. The only problem is I turn on the computer, flick the switch, and the thing shuts off. The switch has to be in the ON position for the computer to even boot. WTF!!!
The other problem I seem to be having (and they may be related) is that I cannot seem to get power to any of my IDE devices. I did change the molex connectors while sleeving and may have inadvertently switched the two black ground leads around a few times.
So whats the diagnosis? I dont think I ruined my PSU but I cant for the life of me get power to the devices. Any help would be appreciated GREATLY!!