• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Need a powerful, yet small server PSU...

Jaxel

Weaksauce
Joined
Feb 8, 2007
Messages
119
Okay, so I have a rather unique requirement for my PC.

First of all, it has to be a 3U server rack case, with a depth of 15 inches... it also needs to fit a full sized ATX motherboard. Currently I have 3U rack cases that fit micro ATX motherboards; but I have run out of expansion slots, so I need to the full total of 6.

There is only one case I have found that met such requirements:
http://www.istarusa.com/istarusa/pr...b=D STORM&model=D-300S5&factor=3#.U-mmRfldVFU

You will notice however that this case does not accept a standard PC power supply unit.

My question is simple. What power supply would fit this unit and be able to supply enough power for a pretty powerful computer, with a top of the line video card and 4 x1 expansion cards in it? I would assume I would need at least 750 watts.
 
As stated in the specs, the case fits a standard 1U power supply. They come up to 2000 watts, so it shouldn't be a problem. But you'll have to find one with 6/8-pin power connectors for the graphics card. With a top of the line GPU, I don't know if Molex adapters would do it.
 
System specs would give us a much better idea of how much power you need. "Top of the line video card" can mean anything from a GTX 680/770 (less than 200 watts) to the R9 295X (up to 600 watts).
 
As stated in the specs, the case fits a standard 1U power supply. They come up to 2000 watts, so it shouldn't be a problem. But you'll have to find one with 6/8-pin power connectors for the graphics card. With a top of the line GPU, I don't know if Molex adapters would do it.

Every 1U power supply I find doesn't even have cables coming out of them... or they are too long.
 
Since the external Intensity models appear to be powered off of a USB 3.0 port, those cards probably use 10-20 watts, at most. And your R9 270X isn't even high end, it's mid-range. 150 watts. Your system is probably a 400 watt system, at most. 500 if overclocking to the max.
 
I've tried running my system off of 450 watts... While it did work, technically, I had to hold the power button on the computer for 2 minutes everytime I turned it on before the system would actually boot. The moment I replaced the power supply with something more powerful, it worked perfectly fine. I guess I would probably be fine with 600-700 watts though... I just dont know which ones will fit my case.

Also, I consider a $200 video card top of the line personally.
 
I've tried running my system off of 450 watts... While it did work, technically, I had to hold the power button on the computer for 2 minutes everytime I turned it on before the system would actually boot. The moment I replaced the power supply with something more powerful, it worked perfectly fine. I guess I would probably be fine with 600-700 watts though... I just dont know which ones will fit my case.

Also, I consider a $200 video card top of the line personally.

That is a symptom of a bad power supply, not insufficient power. You're not using anywhere near 400 watts during boot, more like 100-150.

What you consider is irrelevant. Top of the line cards cost $500+. Mid-range cards cost 150-250. Low end cards cost below $100. That's the way it is, period.

I'll say it again. You have a mid-range system. Your mid-range system peaks at about 400 watts. A good 500 watt power supply is all you need. Make sure it is a good quality power supply, not a crap one that can't deliver 50% of its rated power in spec.
 
Back
Top