Need a new mobo ...

gshock

n00b
Joined
Oct 5, 2007
Messages
61
Noob, here. I have an old mobo with a socket7 AMD. I've had problems keeping the CPU cool enough, and it's running about 143°F. I can't even get a good boot right now. I don't know if I can reuse the heat sink and fan with a new board and CPU.

So let's just assume that I'm going to start with a completely new board, AT (tower), existing power supply and 2 case fans, only using 1 at the moment (want to use both).

I have two 30 GB HD's, but I'd like to replace for 150+ GB HD.
Equipment I'd like to reuse:
  • Matrox G550 video card (old, but it works).
  • (2) LG DVD/CD/RW drives
  • Linksys wireless card
  • (2) DDR 256 MB
  • 10/100 NIC
  • Creative 5.1 sound card (again, old, but it works)

What equipment can I reuse no matter what board I go with?

I'd like to go with an AMD chip, and plan to run a linux distro.

Uses: internet, email, general use, tinkering, playing music, video, etc. Nothing serious, just for simple uses, but all DIY, possibly interested in LC.

For a new board, HD, and misc., I'd like to spend no more than $500.

If you can point me in the right direction, tell me what to look for, help me figure out what needs to be new, and what can be reused.

Thanks,
-gshock
 
Buy my dfi lanparty mobo and jsut purchase a cheap 939 pin cpu and you can reuse all of that stuff........plus I have ram so you could upgrade to more ram too :)
 
I'm really looking for something new, and something I can modify as I get more experience in building my own systems. Not much into gaming, but might need the processing speed for other things later on. Not sure, just leaving my options open.

-gshock
 
If this is truly an AT tower case then you are pretty limited because anything from the past seven years or so is ATX or mATX and they won't fit in your case nor will they accept an AT power supply. If your keyboard port is the large 9/16" plug then you definitely have an AT based system.
Socket 7 came in both styles with the later ATX being mostly, if not all, Super Socket 7 which would accept up to a K6/550. I don't know of any that used DDR memory though. Should be PC-100 or PC-133.

Are you SURE you have a Socket 7? Either way you should be able to make a quantum leap as far as system specs for well under $500.00.
The slowest S754 system you could possibly put together would be a huge jump from even a K6/550.
 
If you are looking for something new, $500 can get you a lot nowadays, maybe even a complete gig that's decent. I would recommend building a whole new rig rather than trying to reuse old parts. It'll be much better and potentially cheaper in the long run. Plus you'll be much happier.
Here's a list you might want to look at:

Good case: http://www.newegg.com/Product/Product.aspx?Item=N82E16811156078
500gb HDD http://www.newegg.com/Product/Product.aspx?Item=N82E16822136178
Decent MB with onboard Graphic that's much better than your maxtor: http://www.newegg.com/Product/Product.aspx?Item=N82E16813157127
Good basic PSU http://www.newegg.com/Product/Product.aspx?Item=N82E16813157127
Good ram: http://www.newegg.com/Product/Product.aspx?Item=N82E16813157127
Decent CPU: http://www.newegg.com/Product/Product.aspx?Item=N82E16819103257

All for under $350 and it'll be much faster than what you are planning if you were to use old parts.
 
If you are looking for something new, $500 can get you a lot nowadays, maybe even a complete gig that's decent. I would recommend building a whole new rig rather than trying to reuse old parts. It'll be much better and potentially cheaper in the long run. Plus you'll be much happier.
Here's a list you might want to look at:

Good case: http://www.newegg.com/Product/Product.aspx?Item=N82E16811156078
500gb HDD http://www.newegg.com/Product/Product.aspx?Item=N82E16822136178
Decent MB with onboard Graphic that's much better than your maxtor: http://www.newegg.com/Product/Product.aspx?Item=N82E16813157127
Good basic PSU http://www.newegg.com/Product/Product.aspx?Item=N82E16813157127
Good ram: http://www.newegg.com/Product/Product.aspx?Item=N82E16813157127
Decent CPU: http://www.newegg.com/Product/Product.aspx?Item=N82E16819103257

All for under $350 and it'll be much faster than what you are planning if you were to use old parts.

htphm42, thanks, this is awesome. I checked out the hardware and added it to my cart. Can you do me a favor and update the links for the PSU and the RAM? They have the same link as the MB. But the whole systems looks exactly like what I'm trying to build.

My first question, being a noob, is "How do you know what works best with what?" I'm sure there's a certain level of experience that goes into it, but there's got to be some basic level of understanding that I just don't have yet.

Next question, "What do I do for cooling?" I didn't see a heat sink or fan anywhere. Is it included with the CPU?

Thanks again. I really appreciate your help.
 
If this is truly an AT tower case then you are pretty limited because anything from the past seven years or so is ATX or mATX and they won't fit in your case nor will they accept an AT power supply. If your keyboard port is the large 9/16" plug then you definitely have an AT based system.
Socket 7 came in both styles with the later ATX being mostly, if not all, Super Socket 7 which would accept up to a K6/550. I don't know of any that used DDR memory though. Should be PC-100 or PC-133.

Are you SURE you have a Socket 7? Either way you should be able to make a quantum leap as far as system specs for well under $500.00.
The slowest S754 system you could possibly put together would be a huge jump from even a K6/550.

fiream29, Yeah, it's a BIG case. I was pinched for room when I bought the heat sink for my current cpu, so I decided to get a tower. I thought it would give me plenty of space, and lots of room for any components I might want in the future. I just checked, and it's a Socket 462. Sorry, I was way off. I have an ASUS N78X MB. The heat sink for it is a couple of years old, and I doubt it will fit anything else.

I guess, the question is, "What do I do with it?" Seems like it's still good, but I think the hardware is too old to be compatible with anything. Can I upgrade the MB and chipset to something useful and give it to a family member to play with? What are my options with it?

Thanks,
 
You have a LOT more options if your system is S462. You could pick up a S939 board and CPU. Most everything else should transfer over as long as you get a board with AGP. Some of the last boards had PCIe and that would require a new video card. If you have a decent power supply and good memory you should be able to do a significant upgrade without spending too much. What are the specs on your power supply and memory?
 
You have a LOT more options if your system is S462. You could pick up a S939 board and CPU. Most everything else should transfer over as long as you get a board with AGP. Some of the last boards had PCIe and that would require a new video card. If you have a decent power supply and good memory you should be able to do a significant upgrade without spending too much. What are the specs on your power supply and memory?

firearm29,
I've got three memory slots, only using 2 x 256 MB DDR400.

The power supply is a DYNAPOWER, MPT 301 160W (300W max), 115V/60Hz.

I've seen that "PCIe" around a lot. PCI slots, I know. What's PCIe?

I don't want to say that price is not an issue, but for the $350 posted by htphm42, I wouldn't mind getting a new one. For not too much, I could upgrade this one, get a new, and still be ahead of the game. This one would work well for another family/friend. Not that I'm throwing money away, but as long as I'm at it, I might as well do it all at once.

Thanks.
 
The AGP slot has been replaced by PCIe x8 or x16. If you want to keep your current vid card you'll need a board with AGP. DDR400 is good. Should work fine in any board up to and including S939 but an extra 512 meg stick will work wonders. Power supply I'd want to replace if possible. If you do upgrade and the old power supply decides to crap it could easily take out everything.

You might watch Dell as they regularly have fairly decent systems for $300.00-400.00. If you don't do any serious gaming these can be a great buy. You get a warranty as well as Vista and you can't build one with these specs for that kind of money. They had a system on sale here while back for $269.00. Watch Slickdeals and Techbargains.
 
I wouldn't get an AGP motherboard to keep the Matrox card. It's going to be much weaker than the integrated 780G chipset graphics that are built into the motherboard. The configuration htphm42 suggested is good. I wouldn't keep anything from the old system. To save some money, you could get this Antec case with the PSU included for $60 after MIR and including shipping charges.

http://www.newegg.com/Product/Product.aspx?Item=N82E16811129031

It only has a 380 Watt PSU, but that is more than enough for the configuration.
 
The AGP slot has been replaced by PCIe x8 or x16. If you want to keep your current vid card you'll need a board with AGP. DDR400 is good. Should work fine in any board up to and including S939 but an extra 512 meg stick will work wonders. Power supply I'd want to replace if possible. If you do upgrade and the old power supply decides to crap it could easily take out everything.

You might watch Dell as they regularly have fairly decent systems for $300.00-400.00. If you don't do any serious gaming these can be a great buy. You get a warranty as well as Vista and you can't build one with these specs for that kind of money. They had a system on sale here while back for $269.00. Watch Slickdeals and Techbargains.

I'll probably go with a 512, just for kicks. But I want to stay away from anything Dell. No offense to anyone intended, just a personal preference. I'd rather pay more, do it myself, and know what I'm getting. I'm happy to upgrade the vid card. I'm not getting much from it, and all the newer technology demands more anyway. Keeping up with the Jones'.

How do I know how big of a power supply I need? If I went with something, say 500W, is that overkill? How do you know?

Thanks for the help. I'm leaning heavily toward the new system. But knowing what I can do with this one is good too, b/c I might just pass it on as a hand-me-down. Someone can use it.
 
Overall this system should be enough for what you are looking for. Just don't expect spectacular gaming or anything and you should be fine.

edit: The CPU is a retail version, so it will include a heatsink.


I don't expect to do a lot of gaming. For the CPU, are the heatsinks and fans provided usually sufficient, or should I buy the CPU and heatsink separately?

Thanks again.
 
I wouldn't get an AGP motherboard to keep the Matrox card. It's going to be much weaker than the integrated 780G chipset graphics that are built into the motherboard. The configuration htphm42 suggested is good. I wouldn't keep anything from the old system. To save some money, you could get this Antec case with the PSU included for $60 after MIR and including shipping charges.

http://www.newegg.com/Product/Product.aspx?Item=N82E16811129031

It only has a 380 Watt PSU, but that is more than enough for the configuration.

Actually, that case/psu combo is actually pretty sweet. Unless you have a quad core and a dedicated graphic card, you really do not need 500W. 380W is plenty for your system. I would only trust antec for psu that comes with cases. Also, the stock heatsink/fan that comes with the cpu should be adequate in cooling your system. You only need an aftermarket if you are planing on overclocking.
 
Actually, that case/psu combo is actually pretty sweet. Unless you have a quad core and a dedicated graphic card, you really do not need 500W. 380W is plenty for your system. I would only trust antec for psu that comes with cases. Also, the stock heatsink/fan that comes with the cpu should be adequate in cooling your system. You only need an aftermarket if you are planing on overclocking.

Showing my "n00bish-ness", is there a big reason to go with the Antec case versus the RAIDMAX you posted earlier? No reason, I'm just digging the LED's and such. I like the clear side panel, too. No reason to go with 500W PSU, but I might decide to upgrade at some point, and go Quad. Any reason not to get 500W now, and use it later?

You said only trust Antec for PSU that comes with cases. Does that override your earlier suggestion of the Antec PSU and the RAIDMAX case?

I'm not being picky, I'm just trying to learn what makes one better than the other.

Thanks for all the help. Much appreciated.
 
Actually, that case/psu combo is actually pretty sweet. Unless you have a quad core and a dedicated graphic card, you really do not need 500W. 380W is plenty for your system. I would only trust antec for psu that comes with cases. Also, the stock heatsink/fan that comes with the cpu should be adequate in cooling your system. You only need an aftermarket if you are planing on overclocking.

I like the RAIDMAX case: http://www.newegg.com/Product/Product.aspx?Item=N82E16811156078
And I was wondering if I could go with this Antec PSU instead of the 500W :http://www.newegg.com/Product/Product.aspx?Item=N82E16817371005.

I'm really leaning toward this setup. I have no issues with the mobo and CPU that you recommended. As long as you don't see an issues with this setup, I think I'd like to go this route.
 
I dont see any issues. From this Anandtech article (http://www.anandtech.com/casecoolingpsus/showdoc.aspx?i=3413) I've estimated your system will only use up to about 195 W under a heavy load. This gives you some head room for a mid range graphics card as well if you want to upgrade in the future since the PSU has a single 6 pin PCI-E power connector.

HDD 15W
Motherboard 45W
RAM 5W
CPU 90W
DVD Burner 20W
Fans, etc. 20W

Add a NVIDIA GeForce 9600 GT @ 107 W and it adds up to 302 W, which is well short of the 380 W it's rated at.
 
What I meant is that most psu that come with cases are crap except for the antec one. Sorry for the confusion. You could go either way with your build. The Raidmax case is pretty sweet, but if you're on a budget, then go with the antec case with power supply. Also, I really don't know why you're going with the 380W psu for $60, when the 500W can be had for $50. Both would work really well with your system, but one has more wattage and better amps on the 12v. maybe I'm missing something.
I've check around and found this: http://www.newegg.com/Product/Product.aspx?Item=N82E16817341010. It's 600W OCZ for $50 AR and come with a free 4gb flash drive as a combo :).
 
What I meant is that most psu that come with cases are crap except for the antec one. Sorry for the confusion. You could go either way with your build. The Raidmax case is pretty sweet, but if you're on a budget, then go with the antec case with power supply. Also, I really don't know why you're going with the 380W psu for $60, when the 500W can be had for $50. Both would work really well with your system, but one has more wattage and better amps on the 12v. maybe I'm missing something.
I've check around and found this: http://www.newegg.com/Product/Product.aspx?Item=N82E16817341010. It's 600W OCZ for $50 AR and come with a free 4gb flash drive as a combo :).


The deal ended yesterday, but I got the 380W Antec PSU for $30. It was an instant rebate, so I jumped on it. I couldn't see the sense in buying a 500W PSU that I wouldn't use... at least, not soon. I'm not on a budget, but not splurging either. That's why I went with the Raidmax, otherwise I would have done what you suggested and get the Antec w/PSU.

That OCZ you found is nice. That might be a nice consideration for my next machine. I don't game, so I have no idea why I'd need another. But the more I learn, the more I want to build.

Newegg rocks. Case is here already, and the rest should arrive tomorrow.
 
hope your build goes well
68d30a9594728bc39aa24be94b319d21.gif
 
Back
Top