My "wind tunnel" WC setup! 56K!

z3r0-

[H]ard|Gawd
Joined
Mar 1, 2003
Messages
1,822
Well damnit I had the whole thing typed up and I click post and it says to many immages and my entire post is gone :|

Long story short I magicly killed my crappy nf7s and my chiller was a disaister. I'm ancey waiting for the NF3 250s so I'm going to WC my Abit KT133A RAID board with 2*256 PC133 kingston value ram and my Ti200. Thing is the Ti200 has a stock AMD sink on it and it wont fit on this board :( I threw my stock and crystal orb away :( It does 250 core though :D I'm going to try to get my small tbird HS on there later.

P1100021.JPG

Thats my maze4 I lapped. Pic of bottom is blurry so I wont post
P1100022.JPG

Theres the card that wont fit :(
P1100023.JPG

And thats the board. From the rig I built in 2000 and never OCed :p The CPU is an 800 tbird that I pencile unlocked.

The water in a sec I dont want to get an error again :p
 
P1100024.JPG

Thats the "wind tunnel" Rad is a procore and most of the back of the duct tape/cardboard box is cut out for airflow. In the front is an evercool 120MM alu frame fan. I've seen 2 people from XS use designes like this and it worked extremely well. Near ambiant temps :O The pump is an Eheim 1250. Havent cleaned my res out yet... When I tape the top down on the box I apparently get a wind tunnel effect and it gives me more pressure and what not and it is supposed to be better than a shroud setup. Gota be better than my case tho. I never realised but I had a 120MM fan pulling through an 80MM hole :| 3C lower than my SLK800 with an SF2 :|


Any comments or questions just ask.
 
Lol theres a hole at both ends.

NOOOOOOOOOOOOOOOOO! I dont want to be bill gates. MS is the devil :O
 
Yea but he is currupt and uglier than me :O Is he even married? At least I think I have a possible chance at that in the future...
 
He's married with children (no attept here on my part to associate Bill with Al Bundy). Yeah I bet Bill is pretty much liv'in the good life.
 
ONLY because of the money ;) :p

Lets get back on topic now shall we? :)
 
z3r0- I only wish it upon you that you're 1/1000 as successful as Mr. William Gates. Peace out little man!:D
 
Ah that would be quite nice. I'd love to work from home making a few million a year :p

Does anyone know if the KT133 boards benefit from NB cooling? I GUESS I could put my FSB block on there...
 
Every m/b benefits from NB cooling. Cool everything you can in your pc. I cool the mosfets that juice the power supply on my m/b. As far as increasing your O/C it may or may not help. I use BGA heatsinks from ufokillerz to cool my mosfets. I do it for stability and durability more than to O/C. Anything that increases the thermodynamics of the electrical parts within your PC helps.
 
Well not all the time... Cooling means almost nothing on rev 2 NF2 boards. I've seen alot run 250 FSB stock cooling and going from stock to chilled water got me nothing on my nf7s
 
Read my post again. I said you might not get anything on the o/c but that doesn't mean you won't get anything on issues of stability. I run my NF7-S @ 215 FSB with the stock Abit NB cooler. I of course removed the NB cooler b4 I installed the m/b and replaced the stock thermal paste with Artic Alumina just for good measure. I'd like to bump to 220 FSB but before I do I'm thinking of putting on a Swiftech MCX-159A for NB cooling. Even if it doesn't allow my board to hit 220 FSB I'll at least know my NB SHOULD last longer.
 
I understand your point but... rev 1.1 NF2 boards often got extra FSB out of sub zero NB cooling but on NF2 boards it does nothing really... I want to know if I could hit a wall than get more FSB from water on the NB...
 
I was 13, until, um... yesterday.

So... young overclocker to young overclocker, where do you acquire funding for your ventures? Like, do your parents just buy you crap whenever you ask for it?
 
Originally posted by miazmaticdotcom
I was 13, until, um... yesterday.

So... young overclocker to young overclocker, where do you acquire funding for your ventures? Like, do your parents just buy you crap whenever you ask for it?

Obviously he sells drugs for it...he's high as a kite!
 
Oh... You just dont understand what I'm asking :p

Anyway I have been saving for a long time for my chiller setup and the A64 will come from xmas money. The WCing I bought over the summer and the original PC my dad funded because he wanted to do it with me... I need a job :(
 
How are you holding the radiator to the box? I dig the setup. And young Wc'ers rock. I was 13 when I did my first setup as well. =)
 
I'm not as of now. I'll think or something. It just stands there...
I was 12 when I did mine over the summer but it sucked :p
 
I was messing around with a cardboard box a few mins ago trying to mount a fan/radiator on it. It was a mess. I need a new idea. :p
 
Heh I use the flaps off a big one. Folded em in half and they worked PERFECT. And I'm just a duct tape gawd ;)
 
Originally posted by BlinD87
And young Wc'ers rock. I was 13 when I did my first setup as well. =)
Ya know what I say to that? MEH! I'm 15 and I've got my priorities straight: learn to drive, sleep, get good grades, sleep, blow up stuff. (I lied about one of the items on the list. First to guess correctly gets a cookie!) Plus I don't have any money for WC. MEH!
 
no I have my priorities straight:
1:eek:verclock
2:play alot of call of duty and pgr2
3:drink alot of soda

;)
 
I have been preaching The Macintosh Way to others since I was six (with my PowerBook 180c - 33Mhz, baby). I wasn't playing games, either, I was trying to get the thing to dial up to my dad's work.

Many years later did I find out that you had to set a proxy server in the browser for it to work. *whacks head*

Oh, and I sent faxes from my dad's Apple Newton. :-p

Ahh, the memories.
 
um........
nice work.
I thought of same thing( saw someone at extremeoverclocking doing this).
But the problem with me was my radiator is mamoth suzuki car radiator.
How big box i will need for it eh? :p
5JOZ77C7TN
 
just a tip

that fan needs to be right up against the radiator in order for it to actually cool the water flowing through it. The way you have it set up theres no way that air gets all the way through the radiator at a high velocity.

hot water rusn through cells in a radiator and it needs cool air taking the heat out of the water. The setup you have is probably just cyclying the water through the radiator without getting the heat pulled out of it. It might cool a tiny bit with the fan that far away but i doubt it. Try mounting that fan right against the thing and tell me how much better it does. If it doesnt perform noticeably better, then something else is broken.
 
00209702.jpg


00209703.jpg


I love your amd heatsink on the video card. My 9700 Pro has the same heatsink on it, only I need to run the stock fan at no less than 7V when I play games or that thing about melts. I don't know how the stock heatsink on the Radeon does it.
 
Jebus dude, once those dust bunnies start fucking you're going to have an epidemic on your hands!
 
not sure why no one has thought of this...but why use a cardboard box???? Why not use some 1/4" plywood or birch (or whatever...birch has a nice finish if you stain it right...also a very strong wood) and build it to match your case. Mount it on top, it could even hold a resevoir, and it may perform better depending on what sort of pressure you're building inside with the windtunnel effect. Cardboard (unless heavy duty) will bend too easily with air pressure, 1/4" board would work very nicely, is easy to cut, and won't give out much over time.
 
Originally posted by PlzDieIRL
[
I love your amd heatsink on the video card. My 9700 Pro has the same heatsink on it, only I need to run the stock fan at no less than 7V when I play games or that thing about melts. I don't know how the stock heatsink on the Radeon does it.

Cables man! Get ahold of yourself! Someone get this man some zip ties and split loom!
 
I used to have everything either ziptied or in the 'wiring closet' (area under the dvd-burner) but I just don't really care anymore. And I'd rather have the dust in my computer than flying around my room.
 
Originally posted by PlzDieIRL
I used to have everything either ziptied or in the 'wiring closet' (area under the dvd-burner) but I just don't really care anymore. And I'd rather have the dust in my computer than flying around my room.

gotchya. If I had a nice WC setup, I probably wouldn't care either.
 
Back
Top