• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

My WC'ing Setup... Finally Done! (Pics)

J

Jacob Freeman

EVGA Product Manager
Joined
May 20, 2005
Messages
96
Tell me what you guys think, this is what I got:

Swiftech Apogee Block
120MM Radiator mounted to 120MM blowhole
Swiftech Pump/res

I tried to use Tygon Tubing, I ordered a bunch of it, but it did not agree with my Radiator. It would leak for some reason, it wasn't creating a good seal. I ended up just using the more stiff stuff that Swiftech recommended.

My second problem ws the res started to leak from the fill cap. I couldn't figure out why. The system would heat up, the liquid would rise, and break the rubber seal. I tightened it as tight as I could and the problem persisted.

So, I went back, and rebled the system by putting the entire case on its side, then ran the cooling system for 30 minutes. Popped it back upright, and it hasn't leaked since. I dunno how that fixed it, but somehow it did.

In any event, here are some pics :)

By the size of this PSU, you can see what I needed to drill the hole close to the front of the case :)









 
Ingonuts13 said:
Looking real nice. You planning on W/C the Video Cards at all?
Click to expand...

No crap! Thats a nasty sweet setup there, you could/perhaps should add a separate loop for the video cards.
 
You must log in or register to reply here.
Back
Top