My very first attempt at overclocking

[Stellar]

Not too shabby I'd say, especially considering I'm running PC2700. Right now it's doing 191Mhz @ 2-3-3-8.

Specs:
A64 Newcastle @ 1.700v w/Thermalright SLK948u + Panaflo 92mm H1B
Epox 8kda3j (stock) BIOS 6A61CPAA, 4.27 drivers
Forton 530w (stock)
1GB Kingston HyperX Pc2700 (BH-5) @ 2.8v
eVGA 6800 GT @ 1.6v (stock) 56.72 drivers
Lian Li PC61 w/4 82mm Panaflo M1As, stock grills and filters

Looking to sell my PC2700 and pick up some OCZ PC4000 EL. So if anybody wants some good bh-5 PC2700.... I'm confident it will go over 200mhz.

 

[Stellar]

BTW, disregard the vcore in CPU-Z, it's been whacky ever since I hit 230 on the bus.

 

[Millow]

BTW, disregard the vcore in CPU-Z, it's been whacky ever since I hit 230 on the bus.

i was about to say...

 

[ColdFlare]

BTW, disregard the vcore in CPU-Z, it's been whacky ever since I hit 230 on the bus.

If you use the Epox utility to read temps and votlages along with cpu-z it will read the vcore correctly

 

[Sepal]

before 'whacky' occured... you were at 2.1-ish in cpuZ ? that still worries me even though i know its not that high.