• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

My very first attempt at overclocking

Stellar

Stellar

[H]ard|Gawd
Joined
Jun 29, 2003
Messages
1,975
Not too shabby I'd say, especially considering I'm running PC2700. Right now it's doing 191Mhz @ 2-3-3-8.

Specs:
A64 Newcastle @ 1.700v w/Thermalright SLK948u + Panaflo 92mm H1B
Epox 8kda3j (stock) BIOS 6A61CPAA, 4.27 drivers
Forton 530w (stock)
1GB Kingston HyperX Pc2700 (BH-5) @ 2.8v :cool:
eVGA 6800 GT @ 1.6v (stock) 56.72 drivers
Lian Li PC61 w/4 82mm Panaflo M1As, stock grills and filters

clocks.jpg


Looking to sell my PC2700 and pick up some OCZ PC4000 EL. So if anybody wants some good bh-5 PC2700.... ;) I'm confident it will go over 200mhz.
 
BTW, disregard the vcore in CPU-Z, it's been whacky ever since I hit 230 on the bus. :confused:
 
Stellar said:
BTW, disregard the vcore in CPU-Z, it's been whacky ever since I hit 230 on the bus. :confused:
Click to expand...

If you use the Epox utility to read temps and votlages along with cpu-z it will read the vcore correctly
 
before 'whacky' occured... you were at 2.1-ish in cpuZ ? that still worries me even though i know its not that high.
 
You must log in or register to reply here.
Back
Top