My next watercooling

[ereshkigal]

Here is the parts list that I will be ordering for next watercooled system

DangerDen TDX CPU Waterblock
Hydor L35 Pump
12 Feet 3/8 Tygon Tubing
DangerDen Xtreme 2 Rad
Innovatek Tank-O-Matic Rev 1.5
2 120mm Fan Shrouds

Right now the case which is the Coolmaster Stacker is being powder coated inside and out midnight blue. So no pics till I get it back and put the new system in it. But will these parts allow me to add 2 vid gpu coolers also at later date?

 

[autobot]

Well the BIX2 radiator might be ok, but with 2 GPUs and 1 CPU I would personally go for either the BIX 2 Pro (its a bit thicker so you have more internal surface area) or one of those '77 Boneville heatercores that have become so popular as of late. Then again that all depends on what CPU and video cards you will be cooling. Can you give us some info on the system specs?

 

[Erasmus354]

Well the BIX2 radiator might be ok, but with 2 GPUs and 1 CPU I would personally go for either the BIX 2 Pro (its a bit thicker so you have more internal surface area) or one of those '77 Boneville heatercores that have become so popular as of late. Then again that all depends on what CPU and video cards you will be cooling. Can you give us some info on the system specs?

ermmm...the Black Ice 2 Pro is THINNER than the Black Ice 2 Xtreme. The xtreme requires more powerful fans to get decent air flow through, so make sure you get 38mm deep fans rather than the skinny ones (its like head pressure on a pump, the deeper the fan is the better it does against pushing air against resistance).

The only thing I would be worried about running to more blocks in series would be that the pressure might be too much for the pump and drop flows, thus hurting your overall performance.