my new 2.6C!

[plur]

sSpec Number
sl6ws
Processor Frequency
2.60 GHz CPUID String
0F29h
Package Type
478 pin PPGA FC-PGA2 Core Voltage

Bus Speed
800 MHz Thermal Guideline
69.0W
Core Stepping
D1 Thermal Spec
75°C
L2 Cache Size
512 KB Manufacturing Technology
0.13 micron
L2 Cache Speed
2.60 GHz Bus/Core Ratio
13

Has anyone had any luck with one of these?!?!?! It says China on the core

I'm still in work atm so I can't wait to try this out in my new MAX3!

 

[Shadey216]

wow dude 75C, that's pretty warm

 

[Steve-O]

i got one from malaysia...hit 250FSB without breaking a sweat, could go higher but my RAM is holding me back. In my Abit IC7-MAX3 its rock solid stable, been running Prime95 torture test and folding@home simultaneously for about 8 hours now at 100% CPU usage, Won't go a bit above 50.5C with all fans turned all the way down, and stays under 49C with fans at a comfortable noise level. Just set vcore to 1.55 and 250 FSB is there.

 

[plur]

I got these babys on the bench here!
With no voltage adjustments im at 260FSB.

For some reason, I cant seem to do this unless im 1:1 tho, which is a pain, even tho my mem will take me a lil higher. Any advice etc whilst I go research some more, brb!

 

[KevC]

Originally posted by plur
I got these babys on the bench here!
With no voltage adjustments im at 260FSB.

For some reason, I cant seem to do this unless im 1:1 tho, which is a pain, even tho my mem will take me a lil higher. Any advice etc whilst I go research some more, brb!

Cos 520MHz DDR is very hard to find Set the memory ratio to 5:4 and see how far it'll take ya!

 

[plur]

hehe, I forgot to mention im running with OCZ PC4200 (DDR533)

However, I've seem to have hit the max for the minute @ 270FSB.

My problem is, no matter what I do, I CANNOT run asynch at any settings or frequencies

If I do not select 1:1, I simply cannot post... odd


Update: These folks seem to have a similar problem on the P4C800 with OCZ. I'm guessing it aint the mem tho...

http://www.abxzone.com/forums/showthread/t-59580.html

 

[plur]

Problem solved: CAS3 will not POST asynch

CAS2.5 has solved it for me.