• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

my new 2.6C!

P

plur

[H]ard|Gawd
Joined
Jun 3, 2001
Messages
1,397
sSpec Number
sl6ws
Processor Frequency
2.60 GHz CPUID String
0F29h
Package Type
478 pin PPGA FC-PGA2 Core Voltage

Bus Speed
800 MHz Thermal Guideline
69.0W
Core Stepping
D1 Thermal Spec
75°C
L2 Cache Size
512 KB Manufacturing Technology
0.13 micron
L2 Cache Speed
2.60 GHz Bus/Core Ratio
13

Has anyone had any luck with one of these?!?!?! It says China on the core :p

I'm still in work atm so I can't wait to try this out in my new MAX3!
 
i got one from malaysia...hit 250FSB without breaking a sweat, could go higher but my RAM is holding me back. In my Abit IC7-MAX3 its rock solid stable, been running Prime95 torture test and folding@home simultaneously for about 8 hours now at 100% CPU usage, Won't go a bit above 50.5C with all fans turned all the way down, and stays under 49C with fans at a comfortable noise level. Just set vcore to 1.55 and 250 FSB is there.
 
I got these babys on the bench here!
With no voltage adjustments im at 260FSB.

For some reason, I cant seem to do this unless im 1:1 tho, which is a pain, even tho my mem will take me a lil higher. Any advice etc whilst I go research some more, brb!
 
Originally posted by plur
I got these babys on the bench here!
With no voltage adjustments im at 260FSB.

For some reason, I cant seem to do this unless im 1:1 tho, which is a pain, even tho my mem will take me a lil higher. Any advice etc whilst I go research some more, brb!
Click to expand...

Cos 520MHz DDR is very hard to find :) Set the memory ratio to 5:4 and see how far it'll take ya! ;)
 
hehe, I forgot to mention im running with OCZ PC4200 (DDR533)

However, I've seem to have hit the max for the minute @ 270FSB.

My problem is, no matter what I do, I CANNOT run asynch at any settings or frequencies :eek:

If I do not select 1:1, I simply cannot post... odd


Update: These folks seem to have a similar problem on the P4C800 with OCZ. I'm guessing it aint the mem tho...

http://www.abxzone.com/forums/showthread/t-59580.html
 
Problem solved: CAS3 will not POST asynch

CAS2.5 has solved it for me.
 
You must log in or register to reply here.
Back
Top