• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

my modded power supply

F

flow207

n00b
Joined
Feb 28, 2004
Messages
5
ok, heres my power supply that i just recently got done modding(well maybe). its the turbolink that came with my case. i dont really have pictures of it before i started but it just looked like a
normal PSU.

use this one.JPG


thats basically right after i got done cutting. i decided to go with 3 holes and paint it black.

use this one 2.JPG


thats after about 2 days of painting and sanding. and at like 4 hours of cutting the plexi and chopping up the inside. i removed the black fan and replaced with a red LED fan i had sitting around (luckily it worked)

use this one 3.JPG


about the best shot of it i could get in my case. i learned one thing with this. plexi is a pain to work with. im thinking i may cut out the fan grill and put something different there and possibly put another window in the opposite side, and paint the rest black.

(update: resized pictures)

-morgan-
 
Props for the whack 'n hack of the PSU. Makes my stock one look shameful! Very nice cutting also. Did you use a dremel? Jigsaw for plexi?
 
i just used a dremel for all the cutting... the hardest thing with the plexi was drilling holes...and ill work on resizing the pics

-morgan-
 
You must log in or register to reply here.
Back
Top