• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

My first custom water cooling loop

M

Mytime34

[H]ard|Gawd
Joined
Apr 11, 2000
Messages
1,574
I finally finished my first custom loop:

Specs:
Corsair 600T White Case
Asus Z97-A mobo
i7-4790k (not overclocked)
4 x 4gb DDR3 (Ripjaw and Gskil)
2 x 512gb M4 Crucial SSD
Asus GTX 780 DCUIIOC
Corsair AS700 PSU
Windows 8.1

Water loop parts:
Phobya Xtreme 200 Radiator
Koolance Radiator 240mm
NZXT FS-200RB Premium 200x30mm Fan
3 x NZXT FN-120RB 120mm Fan
EK 140 Res/pump combo block
Swiftech D5 Pump
3/8 x 1/2" Blue tubing
No name flow detector and temp gauge
Heatkiller 3.0 CPU Block


Ambient water temps are 25c
CPU Temp sits around 27c
Prime 95 small tests and the temps are around 67c (+/- 3c)
The system is super quiet





 
nicely laid out there. i didn't have any luck with a rad above the motherboard as for my mobo didn't clear it well enough.

i have the same case and went a little different of a set up. i did a quad 120 rad on the mesh side panel and a 120mm rad on the rear exhaust. i kept the stock 200mm fans on the top and front.

my cpu 2600k @ 5ghz, idle is 20c and prime95 get to about 42c.
 
You must log in or register to reply here.
Back
Top