My e6850 OC Plan... anything I missed?

The Red

[H]ard|Gawd
Joined
Sep 13, 2006
Messages
1,344
I picked up 4x GB of Crucial Ballistix that runs 800 FSB / 4-4-4-12 ... meaning my OC on the ram would be limited, so I had to get the higher multiplier of the e6850.

I just ordered the e6850 and it is not here yet... this is my first foray into Intel chips since my first Dell P166. I'm not sure if everything works like it does with the AMD chips I normally play with.

I leave the ram multiplier at 200 which gives me 1:1, righto?
I leave the ram FSB at 400, and cpu multiplier at x9 which gives me the 3600 starting position? I'm confused, I forget which numbers exactly to change, and when the 1333 FSB limit comes into play. Please forgive me my intell noobishness.

I currently run an Opteron 148 @ almost 3ghs. I'm looking to take this C2D to 4 Ghz

could anyone help me out with what settings to alter :) ? ... thank you!

It should be here tomorrow or the day after tomorrow, I picked it up from mwave.
 
I run my E6850 w/400mhz FSB (3.6ghz) on the stock cooler, and it takes it like a champ. No instability. Vista64 w/4GB of ram.
 
Yep,you have it.Set your cpu volts to atleast 1.35v and fsb to 400 and max out your ram's recommeded volts.May have to bump up cpu volts to obtain orthos stable.Which mother board?
 
2x2GB or 4x1GB? I've heard of problems overclocking with 4x1GB.

oh, its 2x 2GB matching sets.

Yep,you have it.Set your cpu volts to atleast 1.35 and max out your ram's recommeded volts.May have to bump up cpu volts to obtain orthos stable.Which mother board?

Gotcha, my mobo is an MSI P6N SLI Platinum. The mobo for my Opty is an MSI K8Neo4-F Platinum, and I had such good luck with it, I thought I'd stick to a good thing. My only regret is 650i vs. 680i, but from what I see, most games actually seem to run faster on 650i from the benchmarks I saw online.

Where does the 1333 FSB limit come into play? ... is this going to be simply like HTT multipliers on the Opteron board/chips where it could be any number under the recomended 1000 and there would be no speed difference? ...

Like some kind of multiplier I have to set so that the ram FSB (starting at 400) when multiplied by this multiplier would HAVE to be under 1333? ... same as the HT?
 
You can easily run over 1333 rated fsb.There is no more stay under limit as your previous set up had.Heres a shot of mine.I hope i understand your question correctly.My E6850 needs 1.375v at 400x9=3600.


http://img.techpowerup.org/070721/Capture001.jpg

4.05 ghz on your OC, VERY nice, I want to have the exact same result, but I got 2 sets of 2gb ram that I have to get to go the same speed. From what I see on your setup, all I have to really do is adjust the ram timings to 5s instead of 4s? ... like, its rated for 4-4-4-12, so I change it to 5-5-5-15 and raise the ram fsb to 450? ... or maybe I should try the regular 400 at 4-4-4-12 to start, see if I get instability.
 
Not sure how the 2x2gb sticks run.I would raise fsb slowly,keeping notes of critical data.Post your FPO/BATCH.It appears the B chips are slightly better at this time then the A chips.Good luck and lets some results.

Feel free to pm:) .
 
Back
Top