BaLaClavaAa
n00b
- Joined
- Jul 12, 2007
- Messages
- 54
I Have a Dell Dimension 4600 from 2003 and lately it's been freezing... a lot. After Hurricane Katrina it was broken but I recently replaced the Hard Drive and it started working again for a while, but now it has begun freezing.
These are the specs for the computer:
1 4U107 PROCESSOR, 80532, 2.66G, 512K, 533FSBSKN
1 6W243 DIGITAL VIDEO DISK DRIVE, 680M, 16, I, 5.25" FORM FACTOR, SD616T, REVISION, MIDNIGHT GRAY
1 5W416 MODEM, V.92, DATA FAX, INTERNAL, ALUMINUM, DELL AMERICAS ORGANIZATION
1 0R533 CARD (CIRCUIT), MULTI-MEDIA, AUDIO, SB0203
1 1X361 KIT, DOCUMENTATON ON FLOPPY DISK, SOFTWARE, DOMESTIC
2 D0837 KIT, DOCUMENTATON ON FLOPPY DISK, SOFTWARE, DIGITAL VIDEO DISK DRIVE, CYBERLINK, 4.13C
2 8T915 DUAL IN-LINE MEMORY MODULE, 512, 333M, 32X64, 8K, 184
1 R0285 DIGITAL VIDEO DISK DRIVE, DVD+RW, 4.7, NEC CORPORATION, 4X, DVD+R, MIDNIGHT GRAY, V2
I just changed the:
1 F0503 CARD (CIRCUIT), GRAPHICS, RADEON, 9000, Television Tuner, DIMENSION
1 P0148 KIT, BREAK OUT BOX, GRAPHICS, RADEON, 9000, Television Tuner, DIMENSION
with a Radeon 1300 Pro
and the
1 2W938 HARD DRIVE, 120GB, I, 7.2K, 60G/P, Seagate-Avalache
with a 400GB something or other
and I am running Windows XP SP2
And it shouldn't be the graphics card either.
Please let me know what I should look into, and is anything in here so opsoleat I should replace it or upgrade it.
(update I took out the lagging bit, the graphics card wasn't installed properly but its right now)
Oh and pardon my grammer, I'm in a sort of rush =P
Thanks =D
These are the specs for the computer:
1 4U107 PROCESSOR, 80532, 2.66G, 512K, 533FSBSKN
1 6W243 DIGITAL VIDEO DISK DRIVE, 680M, 16, I, 5.25" FORM FACTOR, SD616T, REVISION, MIDNIGHT GRAY
1 5W416 MODEM, V.92, DATA FAX, INTERNAL, ALUMINUM, DELL AMERICAS ORGANIZATION
1 0R533 CARD (CIRCUIT), MULTI-MEDIA, AUDIO, SB0203
1 1X361 KIT, DOCUMENTATON ON FLOPPY DISK, SOFTWARE, DOMESTIC
2 D0837 KIT, DOCUMENTATON ON FLOPPY DISK, SOFTWARE, DIGITAL VIDEO DISK DRIVE, CYBERLINK, 4.13C
2 8T915 DUAL IN-LINE MEMORY MODULE, 512, 333M, 32X64, 8K, 184
1 R0285 DIGITAL VIDEO DISK DRIVE, DVD+RW, 4.7, NEC CORPORATION, 4X, DVD+R, MIDNIGHT GRAY, V2
I just changed the:
1 F0503 CARD (CIRCUIT), GRAPHICS, RADEON, 9000, Television Tuner, DIMENSION
1 P0148 KIT, BREAK OUT BOX, GRAPHICS, RADEON, 9000, Television Tuner, DIMENSION
with a Radeon 1300 Pro
and the
1 2W938 HARD DRIVE, 120GB, I, 7.2K, 60G/P, Seagate-Avalache
with a 400GB something or other
and I am running Windows XP SP2
And it shouldn't be the graphics card either.
Please let me know what I should look into, and is anything in here so opsoleat I should replace it or upgrade it.
(update I took out the lagging bit, the graphics card wasn't installed properly but its right now)
Oh and pardon my grammer, I'm in a sort of rush =P
Thanks =D