My Abit AV8's AGP lock doesn't work

Avengeance

Gawd
Joined
Apr 10, 2004
Messages
773
Well I have been trying on and off over about 3 months to get this thing to work and I dont think it is going to happen. Pretty much I can get the mobo to do 300MHZ FSB but after a few mins my video card will just kick on the VPU recovery. If I turn it off, then windows just stops responding. Pretty much what I have to do since my ram sucks, is kick up the FSB and then turn on the RAM/FSB ratio to 266MHZ (I dont remember the fractions to them, can anyone let me know what they are again cause I forgot, thanks) and so its not the ram for sure. I kick up the voltages on the CPU, AGP, NB so everything is getting a good amount of voltage. If I run this thing at 250MHZ FSB usually it does alright but sometimes it crashes. Does anyone have or know of any guides or tips I should look at for OCing this mobo? Thank you.
 
Well, is there much point in a 300MHz FSB anyway? Your not using VX or anything, so you dont need a higher 1:1 ram speed, and a high bus speeds wont do anything for performance on an A64.
 
itll work, just throw on the 8:2:1 ratio and let her fly. a guy named plywood99 got his AV8 up to 325htt. you just need to slap that on and your fine. via chipsets are quirky, thats why im moving to Nvidia :D
 
Back
Top