My 2400+ Mobile experience...

[Visable-assassin]

well heres a start...not too bad im happy so far..i guess

ill try higher later on

 

[Visable-assassin]

its funny...itll pass prime at this speed..itll play UT2K4, quake 3 ,CS and as much Farcry as I can throw at it...but it wont run 3dmark2k1...WTF gives?

 

[sdk]

yeaha that happend to me, try reinstalling 3dmark

 

[kronchev]

temps plz kthx

Right now I'm digging 2.4 ghz, but at 1.725 volts...its weird that it has to get ~2.0v to get 100 more mhz

 

[Visable-assassin]

Originally posted by kronchev
temps plz kthx

Right now I'm digging 2.4 ghz, but at 1.725 volts...its weird that it has to get ~2.0v to get 100 more mhz

room is hot right now so Im idleing at 100f (38c) underload when everything is like it should be I see 116f (46c)

 

[rogue_jedi]

nice oc.

what mobo is that? i'm trying to decide right now cause i need to replace my dead asus. (and i don't want an asus as i need more than 1.85vcore)

good luck

 

[Visable-assassin]

Originally posted by rogue_jedi
nice oc.

what mobo is that? i'm trying to decide right now cause i need to replace my dead asus. (and i don't want an asus as i need more than 1.85vcore)

good luck

Its on a NF7-S rev2 right now.

 

[rogue_jedi]

what're the voltage options on that mobo? (too lazy to go look them up now) also what's the onboard sound like?

o yeah anyone used the an7 and had it do well?

 

[Swat]

Originally posted by kronchev
temps plz kthx

Right now I'm digging 2.4 ghz, but at 1.725 volts...its weird that it has to get ~2.0v to get 100 more mhz

I feel your pain , I can do 2.2ghz @ 1.6vcore on my 2400-M , but I have to up the vcore to 1.87 to do 2.4ghz =\

 

[Visable-assassin]

Originally posted by rogue_jedi
what're the voltage options on that mobo? (too lazy to go look them up now) also what's the onboard sound like?

o yeah anyone used the an7 and had it do well?

2.3v vcore if i remember right.
1.7 on the Vchipset
1.8 on the VAGP
3.1 or something on memory

 

[Techmasta]

Vdimm is ~2.9v on the nf7-s. Most boards overvolt about +.1v. Steer clear of the AN7, too many people having problems with it. The NF7-S has Soundstorm which is very good.

 

[BrainC0DE]

my 2600+ M does 2400mhz at only 1.65v and 2650mhz with out a hitch, all air.

 

[Hades16x]

Hey i dont want to hijack the thread but im building a shuttle/2400 mobile system and im wonding if this is any chance of running a 200mhz fsb at stock voltages or very close to it

Worried about temps because the room never leaves 80F in the summer and its been up toward 92F in the middle of the day

 

[2Fresh]

What is the vchipset? I have that on my NFII and have no clue.

 

[oldbrave]

Originally posted by BrainC0DE
my 2600+ M does 2400mhz at only 1.65v and 2650mhz with out a hitch, all air.

Hey Visable-assassin, I'll hold him down and you pluck out his nose hairs !

 

[Visable-assassin]

Originally posted by Cloud15x
Hey i dont want to hijack the thread but im building a shuttle/2400 mobile system and im wonding if this is any chance of running a 200mhz fsb at stock voltages or very close to it

Worried about temps because the room never leaves 80F in the summer and its been up toward 92F in the middle of the day

should be able to...I ran my "prelim" test at 9x200 stock voltage ran prime for 3 hours...no problem...I also did the wire trick...dont htink it did much tho LOL

Originally posted by 2Fresh
What is the vchipset? I have that on my NFII and have no clue.

Vchipset controls the voltage to your northbridge. Ive got mine all the way up..just because my MCX159 will handle it no problem

Originally posted by oldbrave
Hey Visable-assassin, I'll hold him down and you pluck out his nose hairs !

with rusty tweezers...

 

[DaLurker]

Same thing happend to me. My system would be stable for everything except it wouldn't loop 3dmark 2k1 or 2k3 over night. Turns out I had to run the FSB down 5mhz b/c at 200mhz, it wasn't being stable in 3dmark. Everything else was fine. . Couldn't quite understand it, and still don't.

 

[Visable-assassin]

Originally posted by DaLurker
Same thing happend to me. My system would be stable for everything except it wouldn't loop 3dmark 2k1 or 2k3 over night. Turns out I had to run the FSB down 5mhz b/c at 200mhz, it wasn't being stable in 3dmark. Everything else was fine. . Couldn't quite understand it, and still don't.

That possibly one reason...Im testing at a different speed right now...ill check 3dmark with that later. right now I reinstalled 3dmark..and now its telling me it needs DX8 LOL it ran just fine before the reinstall....but it wouldnt run past the Lobby demo.

 

[BrainC0DE]

Originally posted by Visable-assassin
That possibly one reason...Im testing at a different speed right now...ill check 3dmark with that later. right now I reinstalled 3dmark..and now its telling me it needs DX8 LOL it ran just fine before the reinstall....but it wouldnt run past the Lobby demo.

you need to install the patch.. i forget if you mentioned if games play fine, because i have the same problem and its because my PSU is crapping out when my 9800 pro kicks in.