Kanou_Kyosuke
n00b
- Joined
- May 18, 2007
- Messages
- 3
Hi guys...
I have some problems with my hardware and I need some help or tips from ya.
So...One day I turned on the computer and monitor was black.Where is my desktop? Computer was ok everything went as usual but my monitor didn't work.
I turned off a computer and restarted it but It didn't work. Again. I did the same thing for twice and then monitor worked properly. Next day the situation was same as previous day.But that day I turned off and on my PC for 6 times. Before I bought graphic card when my PC worked fine i saw that my processor was only 2200+ instead 3000+. I went into bios and put everything on default.
Then was cool, but one day later my monitor didn't work.Always black.The light on monitor was beating like before. Then I installed my new graphic card ( Club 3d Ati radeon x1550 ) and everything worked fine. Excellent. But in windows I saw that something is wrong. My processor frequency was 1,7gh. I moved jumpers and then was 2,2 gh. But what was really wrong was...Where is FSB 400?My processor is now only on 200FSB by jumpers and by manual I couldn't do anything and my memory (Ram) was only at PC1800 and now is at PC2100 (I have on DDR 400) and hard drive has only 127 gb instead of 160gb .These problems are really bothering me. Why went everything down by half in FSB? Jumper position where should be 333 FSB is only 166 FSB.
I made a test with everest and my memory latency is 200 ns.
How could that be?Before I had around 90 ns( nano seconds).
My PC now fell in lower ranks. What can I do?I also reseted cmos battery but with no effect.
My PC configuration is: AMD athlon 3000+( Barton ) ,768 mb RAM (1x 512, 1x 256 mb DDR400), hard disk 160 gb Hitachi ATA, graphic card ( before ) Ati radeon 9600 128mb, ( now ) Club 3d Ati Radeon x1550 256 mb GDDRII, AGP 8x, Asrock K7s8x v3.0 motherboard,and WinXP Sp2
I'm so sorry for such long post and mistakes in my writing.
Thanks for any tips you might have.
I have some problems with my hardware and I need some help or tips from ya.
So...One day I turned on the computer and monitor was black.Where is my desktop? Computer was ok everything went as usual but my monitor didn't work.
I turned off a computer and restarted it but It didn't work. Again. I did the same thing for twice and then monitor worked properly. Next day the situation was same as previous day.But that day I turned off and on my PC for 6 times. Before I bought graphic card when my PC worked fine i saw that my processor was only 2200+ instead 3000+. I went into bios and put everything on default.
Then was cool, but one day later my monitor didn't work.Always black.The light on monitor was beating like before. Then I installed my new graphic card ( Club 3d Ati radeon x1550 ) and everything worked fine. Excellent. But in windows I saw that something is wrong. My processor frequency was 1,7gh. I moved jumpers and then was 2,2 gh. But what was really wrong was...Where is FSB 400?My processor is now only on 200FSB by jumpers and by manual I couldn't do anything and my memory (Ram) was only at PC1800 and now is at PC2100 (I have on DDR 400) and hard drive has only 127 gb instead of 160gb .These problems are really bothering me. Why went everything down by half in FSB? Jumper position where should be 333 FSB is only 166 FSB.
I made a test with everest and my memory latency is 200 ns.
My PC now fell in lower ranks. What can I do?I also reseted cmos battery but with no effect.
My PC configuration is: AMD athlon 3000+( Barton ) ,768 mb RAM (1x 512, 1x 256 mb DDR400), hard disk 160 gb Hitachi ATA, graphic card ( before ) Ati radeon 9600 128mb, ( now ) Club 3d Ati Radeon x1550 256 mb GDDRII, AGP 8x, Asrock K7s8x v3.0 motherboard,and WinXP Sp2
I'm so sorry for such long post and mistakes in my writing.
Thanks for any tips you might have.