Multiple MACHINE_CHECK_EXCEPTIONS...wor ry or not?

Sovereign

2[H]4U
Joined
Mar 21, 2005
Messages
3,098
I got a MCE yesterday during Supreme Commander. Never had one before. Processor is stock, RAM is at overclocked speeds (5/4 dividers FTW), but it is DDR500 memory at DDR500 so it is within spec.

I did some Googling and it looks like a MACHINE_CHECK_EXCEPTION means a piece of hardware is dying. I suspect the CPU because it was overclocked. But it's not now, and it has adequate cooling (Scythe Ninja Plus)...

Today, I got three BSoD. I woke up and my computer had BSoDed overnight (no overclock, no folding). I went to the bathroom and came back, having reset it, BSoD! I was playing SupComm today (after 2400MHz OC, 240MHz RAM), BSoD...
 
It certainly could be your CPU, but I would test your PSU as well, as that could be the problem as well. You should probably run Memtest for as long as you can......
 
I'm running Memtest now, actually. Everything is at stock speeds, including the memory which was rated for DDR500 but is currently at DDR400. Also, if the PC Power and Cooling 850SSI can't handle an Opteron 170, 2GB RAM and dual 7900GTXs, I would be surprised...I was told here that was "more than enough." However, it is possible that I got a bad PCP&C unit, let's hope it's that and I don't have to buy a new CPU (but shipping the PCP&C is going to be a bear...it weighs half a ton)
 
Just pick up a PSU tester, they're pretty cheap (cheaper than shipping off your PSU:) ).. you can get them at Fry's or Microcenter... I saw one at CompUSA, if you still have one around....
 
How can I ensure that the problem is the PSU? I'm trying to avoid spending unnecessary money here. I'm going to post back when I get back from work (I'm in the music office now), memtest will have been running for over an hour. I plan to leave it running for at least 8 hours at stock. If that works, I'm going to overclock the RAM but not the CPU using the 5/4 divider of the K8N Diamond Plus motherboard. If the memory fails at overclocked speeds that are within its DDR500 spec, then I'm going to be asking NewEgg/G.Skill for some new RAM... Does NewEgg replace things for a year if they are defective? I thought I heard/read that somewhere but can't find it on NewEgg's site. UPDATE: Memtest run one succeeded with no errors, leaving it alone for a while longer to make a few more passes, then moving RAM to overclocked speeds. What would happen if the CPU failed in the middle of a memtest run? There would be no BSoD, those are Windows things...
 
CPU passed ten hours of Torture Prime on both cores, ran six hours of memtest and no errors there either. Computer's stayed ON for a day now (it actually BSoD overnight with this error once)...the only thing that I seem to know for sure is that SupComm = BSoD

*goes off to test*
 
Did you test your PSU yet? A flaky PSU could be the problem.... and a tester is a cheap investment that you may find useful in the future anyhow......
 
No, but I found another interesting possible explanation that has nothing to do with PSUs or failing hardware. More like failing software, specifically that nVidia's drivers fail life again. The "SMBus" driver apparently (which I inadvertently selected when installing chipset drivers) causes this error sometimes, at least that's what people on nVidia's forum said. I didn't post there, but I also assumed that my overclocking adventures did something in.

I'm still open to the idea of a bad PSU, but I'm leaning toward this driver thing since the nFarc...sorry nForce chipsets seem to be so picky, trouble-prone and annoying... I love my SLI as much as the next guy, but do we really have to put up with this to get the best video performance available?
 
Back
Top