MSI Mobo Won't Post... Help!

BOX-22

n00b
Joined
Sep 8, 2003
Messages
21
I recently bought an MSI K7N2GM-V mobo from newegg along with a 512meg stick of cheap Corsair ram to go with an old XP 1700+ I have to give as a present to a friend.(I picked this board because I could use this leftover processor and because it had onboard graphics.) The problem is that no matter what I do, I can't get it to post... no beeps... nothing on the screen. I even unhooked everything but the CPU, Ram and Monitor and fired the board up on a piece of cardboard. The monitor refreshes when I reset the tower but it will only show the self-test screen. (I tried it on a second monitor but that apparently wasn't the problem.)

Do you guys have any info on what problem this might be? I've filled out a tech ticket through MSI's site along with going through their troubleshooting docs but I need this taken care of ASAP. I'm supposed to drop it off at my friend's house this weekend.

Specs:

MSI K7N2GM-V w/ integrated graphics
AMD XP 1700+ (tbred I think)
512megs Corsair PC3200
Old Maxtor 40gig drive
Plextor 12/10/32A burner
Floppy
Inwin mid-tower/Powerman 300watt
Cheapo Aopen modem (not installed yet)
 
I don't have to connect a 4pin plug from the psu to the mobo for it to function, do I? It says it's there to power the cpu but it doesn't say it's a requirement. (And my psu doesn't have one...)
 
How's the board look physically? any bulging caps etc??



Whats the true capacity of your power supply? What I mean by that is not whats written on the side like "400W" I mean what are the amperage (A) specs for each voltage on the side of the power supply for:
3.3V = ?A
+5V =?A
+12V =?A
+5VSB =?A

These are the minimum recommended current capacities in the AMD desktop builders guide circa 2002 for a certifed 300W power supply that would be used in a Socket 462 (socket A) system.
+3.3V = 28A
+5.0V = 30A
+12.0V = 15A-18A
+5VSB = 2A-2.5A

You should look for something similar to this:
+3.3V = 28A
+5.0V = 30A
+12.0V = 20A+
+5VSB = 2A

These are the power supplies I recommend the most.
Tagan / Epower TG-380, TG480, EP-450XP-C1B
Antec True380, True430, SL400, SL450
 
I just received an email from MSI technical support. Their instruction regarding the 4pin power connector is that It is required for normal operation. I kind of thought that myself after powering the system because the stock heatsink never became remotely warm to the touch. After I get another power supply, I'll follow up again on whether that fixed the problem.

PS - Thanks for your input, MD.
 
Back
Top