MSI K8n nforce4 ultra ocing

todlerix

2[H]4U
Joined
Apr 25, 2003
Messages
2,244
Well at the moment im at 4xHT 250 1:1 timing cpumulti at 10x

i have geil pc4000 2.5-4-4-7
3500 90nm s939
msi k8n nforce 4 ultra
1 sata maxtor 120gb onboard raid, ch1


right now im only oc'd to 2500mhz 250mhz memory

575/1150 6600gt 48* c at full load.. looped 3dmark2005 for 1.5hours

3636 memory read speed (everest home ediditon)

cpu temps are at 37*C at full load



-----------------

now for my problems, that im hoping you guys can help me with. my memory on start up says single channel 64bit i have a dual channel board .. their matched pairs of sticks, came in the kit.

also i cant push the overclock anymore... not sure why :( by default 1.4v for 90nm 3500 i think.. ive tried setting it to 1.550 in the bios, but cpu-z is still reporting 1.408-1.482

im pretty sure thats bad lol, my psu isnt the best, but its working. TTGI 450w.. it looks neat, quiet and stuff but i want some more oc

please help ;p
 
well i didnt have the memory on dual channel memory bandwith is now 7116mb/s
 
From what I've experience and read, on MSI boards (hell, most boards) the voltage starts to droop as you raise the voltage....so just becaues you set 1.55v doesn't mean you get 1.55v going to the CPU. CPU-Z (i think) is a good place to see what your CPU is getting. On my board...

1.65v = 1.62v
1.70v = 1.65v
1.75v = 1.70v
1.80v = 1.73v

That's how I've noticed anyway...and I've heard about these NF4 boards having some droop problems as well. Not sure if anyone with the same board can chime-in and back me up / tell me im full of crap :p
 
i dont know why but...

cpu voltage ranges from 0.825 to 1.55v

cpu's voltage is 1.4 at stock

anyone else with the mobo have same problem :(?
 
todlerix,

Nice setup. I recommend you head over to either ocforums.com or xtremesystems.org and look at the FAQ on OC and MSI boards.

Here are some quick tips.

OC just cpu in Bios set memory to 166 divider. this will help eliminate memory as limiting factor to find max CPU OC ( 133 is also good)

Max voltage that will probably work is 1.45v + % MSI boards work that way. the % extra voltage is how you get higher volts. Also keep in mind 1.4 + 10% should get you a CPU speed of like 280-285 NP. my A64 3000+ on a NEO2 board with 1.45+13% gets 298Mhz.

there are lots of settings to tweak so check this link as a starting point the NForce3 stuff will still apply to NForrce4 board.

http://www.xtremesystems.org/forums/showthread.php?t=46730

Thats just a starting point. Those other boards are really best for MSI stuff.

Good Luck
 
Back
Top