MSI k8n neo2 sata problem, help me please

Xenozx

2[H]4U
Joined
Jun 16, 2004
Messages
2,127
OK i finnally got my new motherboard in and everything booted up. So far ive only had one problem and that is getting the windows installer to recongnize my raid array. I went into the nvidia raid controller thing and created a raid 0 array. i cleared all the data from the disks. the only problem is when i go into windows and i hit f6 and i choose "nvidia raid" as the raid driver. i get in and it shows the SATA drives but its listing them separately. its not listing them together like it should. Any idea's on what i should do?
 
Just to mention, The bios detects the raid fine, it says its 223.58 gb's but for some reason the windows installer is showing them separately. Ive installed a raid array with these drives before and using the same CD of windows on an a8v without a problem. Now for some reason the windows installer is showing sata drive 1 by itself and sata drive 2 by itself rather than showing one big drive. any idea what i could be doing wrong?

im using the raid driver on the floppy that came with the board, i tried to look for a newer version via nvidia and msi's website to no avail 8(
 
Apparently im not the only one who ran into this problem. If you visit MSI's website there is a forum section and someone layed out what you need to do. Basically the floppy with the raid drivers that where included with the motherboard dont work and suck ass, so basically you have to download the latest system driver from MSI's website (28 mb) then you have to find the raid drivers and copy them to a floppy. apparently these are newer versions and they worked like a charm. Loaded the new drivers up and windows saw 1 drive. im a very happy person for the most part now. Just keep running into one other problem but ill post that elseware. no one helped me but myself so thank you me 8)

i hope this helps someone else in need.
 
Back
Top