MSI K8N Neo2 Problem??

Carpus

n00b
Joined
Oct 15, 2004
Messages
9
Having a problem here that I've looked around to see if anyone else has and haven't come acoss it.

I just put together a new system:
MSI K8N Neo2 Plat
AMD 64 3500
Crucial Ballistix DDR 512MB PC3200 x2
Antec 550w True Control

I was running a BFG 6800 OC without any problems. Picked up a BFG 6800 GT OC. When I put in I had scattered colored lines w/ cutout, radmon colored pixels, blurring in Win XP SP2 and random lockups and reboots. It even had random colored lines and pixels on the boot screen. So I figured drivers are not the cause. I returned the card for same make/model. Same exact problems. I called MSI and they told me that the board is not compatable w/ 6800 GT. I said what?? :eek: I told him I have rev 1 w/ both 1.2/1.3 BIOS. He said I needed to get rev 2??
So i returned the BFG and picked up a PNY 6800 GT. Same problems but not as bad, but still unusable.
Is this true about this board? I have read about tons of ppl using a 6800GT w/ this board. To me it seems like a power issue but my PS is rated to run 30a on the 12v rail.
Any help much appreciated at this point.
 
can't believe that, man, that would be way too strange. i mean it's a vid-card hordes of ppl are/will be using, not some s3 virge ancient crap. and you said MSI told you??
 
it sounds like BS to me.

Check my sig, I have had zero problems. I am an early adopter so I most likely have a rev 1 mobo. Try a different 12V plug on the PSU and make sure the vid card is the only thing plugged in.

If you have another machine, try the vid card in it.
 
I don't have any problems and my setup is very similar.

I am running:
3500+ (.13 micron)
MSI K8N Neo2 Platinum
Crucial Ballistix DDR500 (PC4000)
BFG 6800GT OC
Antec NEOPOWER 480W

and everything is running very smoothly.

Maybe your motherboard is a dud?

Edit: Not sure what revision of the motherboard I have, but I bought it fairly early.
 
Still w/ problems after some bios flash, change in AGP voltage and 66/67 lock.
So should I RMA the board or the PSU? Thanks.
 
Well it turned out to be the PSU. I was slumming in Comp USA today and I saw the Ultra XConnect 500w PSU, Titanium finish. I grabbed it for $99 bucks, which is $20 bucks cheaper than I've seen online and hooked it up. 6800 GT runs great!! I also love the X-connect cables. They take away alot of the clutter in the case. :)
 
man.. I see too many posts like this.. Just makes me glad I bought a PCP&C 510 Deluxe.. I NEVER have to worry about this kind of stuff.. :D
 
Back
Top