MSI K8N Neo2 Overclocking Problems

WickedAngel

2[H]4U
Joined
Sep 4, 2003
Messages
2,644
Hey guys...I'm having a problem I'm hoping you guys can help me with.

I have an MSI K8N Neo2 Platinum with an AMD64 3200+ (Winchester core). No matter what I do, I can't seem to get any overclock out of it. Every time I try to overclock, it shows a warning message in the POST telling me to go back and change my settings. I know for a fact that the Winchester can be overclocked by at least 300mhz, yet I'm not able to get anything out of this.

I was wondering if someone had any experience with the BIOS in the Neo2, because that is where I think the problem is. I think I have something conflicting but I can't figure it out.
 
Whenever I try to drop the HTT it hangs on that menu and I can't get back out. It seems to be stuck on 5.
 
Use the + / - or Page up / page down keys to change the HTT . You HAVE to change this as the HTT bus is very sensative to going over 1000 HTT.I could not go more that 205 with the HTT set to 5 x - but 4 x will get you to 250.
 
jsadie said:
Use the + / - or Page up / page down keys to change the HTT . You HAVE to change this as the HTT bus is very sensative to going over 1000 HTT.I could not go more that 205 with the HTT set to 5 x - but 4 x will get you to 250.


I couldnt go a drop over 210 @ 4HTT on that motherboard.(wouldnt pass prime) This motherboard seems to be very picky about having all the right settings in place................ AGP fastwrites, voltage and you have to disable the overclock feature in the bios just among a few key settings. Lots of ppl love this board, but my experience wasnt that great for overclocking. I tried everything under the hood to get past 205 and no luck. I went back to my ASUS A8V and got to 2.38 easy. 30C and 37C under heavy work load. Sometimes luck plays a part of it i guess.
 
try to see if there is an upgrade or something for the BIOS.
you might see a difference after.
 
I've noticed something that could probably be the reason for the instability. The motherboard overclocks the DDR speed in relation to the CPU FSB for some reason...I can't figure out why.
 
i am having the same problem and i heard it might have to do with the NVraid if your using it.
but i have not tried it yet. if you found ay thing about it please post. :confused:
 
it overclocked like a dream. drop ur HTT multiplier down to 4 if ur going to overclock up to 265. Anything over 265 drop HTT down to 3. Make sure ur ram timings are not too tight, and make sure u have enough voltage. If your ram likes voltage, id suggest picking up a DDR booster. they work wonders without harmful mods.
 
I can't get this damned thing to stop associating the CPU FSB with the Mhz of the RAM. I don't understand why it makes the two the same...it doesn't make sense.
 
WickedAngel said:
I can't get this damned thing to stop associating the CPU FSB with the Mhz of the RAM. I don't understand why it makes the two the same...it doesn't make sense.

thats how amd64's work;
fsb in sync with ram. you should run the divider if you ram cant go higher. the divider is in memory settings:

200 is 1:1 so if your fsb is 200, your ram is 200mhz
166 is 5:6 and so on

just make sure you stay on 1t, also get bios v1.41b, great oc bios
 
ok, praise me i had to restart juust for you to go look;

in bios;
cell menu > dram cinfiguration > max memory frequency (this is the divider)

200 is 1:1
166 is 5:6
133 is .... and so on
 
I told you guys I was a noob to this...I thought that the option to change the ratio would be labeled as a divider.

I managed to figure it out last night by myself on accident (I figured I would drop it down to 166 to compensate for the added weight that was being added to the speed when the FSB was overclocked).
 
Back
Top