MSI.. Hate Kingston Ram???

Spyder

Limp Gawd
Joined
Mar 1, 2003
Messages
175
I have a MSIK72N mobo right and 1gb of kingston pc3200 ram

2x512 chips... any ways i put it in my mobo long story short my computer keeps restarting randomly for no reason... just kinda some times in 30 seconds some times after an hour you get the idea... first i thought my mobo was like fooked right... but my friend who has the exact motherboard as me bought the same exact ram 1gb kingston pc3200 value ram and has the exact problem.. any ideas of what i can do to slove this problem???
 
I used to have some el cheapo Kingston ram in this board I'm using right now. I had troubles with instability that stopped the moment I got chasis temperatures below 45C or so. If your problem is the same, then you might need to do a little better cooling. Also, if you have the cash to spare, it might not hurt to throw some passive cooling on those memory chips to maybe get a bit more stability. Here is a good choice:
http://www.newegg.com/app/ViewProductDesc.asp?description=35-110-105&depa=1
Two of those should do some nice cooling and you could probably reuse them in the future when you upgrade if the memory you upgrade to doesn't already have passive cooling (mine did.) That's about $5 each, but $4 shipping, so roughly $15 to get two. For what it's worth, they have an aluminum variety for $1 less, but even I would spend the extra $2 for the difference. The copper version isn't in stock atm, but will be in about 3 days.

Anyway, maybe just adding more fans will do it. You might test this by taking off the side of the case to expose the memory and everything and set up a fan that blows into it (have a decent distance between the fan and the case or you risk EMI problems.) This will probably tell you whether the problem is temperature or not. For some people this is even a good permanent solution, but many of us don't have room on our desks or whatever.
 
i have pure copper ram sinks on it already almost look exact like the ones posted on newegg that you shown.. but still no avail.. right now i have a watercooling set up with duel fan Powersupple another fan ontop of my case one on the back
2 on the front
and 2 on the window

thats like 8 fans... still my casetemp usually stays under 30c and my ram chips dont really feel that hot when i touch the copper plate.. think it might just be some sort of hardware issue?
 
Ok, thought that might be related as it sounded rather a lot like the issue I ran into. But between heatsinks and darned good cooling (my PC runs smoothly at well above 30C) I'd say it's almost impossible that it be temperature related unless that's one heck of a faulty sensor detecting the temperature, which I doubt if you truly have 8 fans. Besides, like you said the ram doesn't feel hot.

Hrm, well, it's either a hardware issue, or something directly related such as timing. Check your bios settings to see what the timings are set to perhaps. If you set them too low, the memory works harder and can maybe get a bit more unstable. Just for testing purposes, try the highest latency settings and see if it runs stable. This may not be the problem, but it's a simple enough test that it can't hurt to try. (Latency settings are things such as CAS and etc that are something such as the numbers I have, 2-2-2-6. Most bios will have each as a seperate option.) Also, check for similar things such as the 1T timing option I have in my bios that causes severe instability if I enable it (also in the memory settings.)

I'm afraid I have no other ideas from the information given, and, considering how few replies you got in all this time, I'm guessing not many other people do either.
 
Back
Top