msi 9802-020

WinterWolf

Gawd
Joined
Apr 7, 2000
Messages
560
:confused:

Anybody have any experience with this board?
http://www.newegg.com/Product/Product.aspx?Item=N82E16813130105

I just bought this from Compgeeks. They advertised it as a version 010. As you can see the 020 does not have a standard ATX power connection. It looks like it runs off the 12v P4 connector. The board is brand new, but its old enough that it doesn't even show up in a search at the MSI website. I sent them an email yesterday asking about a correct manual. The one that came with it is for the wrong version and doesn't mention the actual power connections.

I can always return this since it's not what they advertised it to be, but If I can figure out how to use it this will actually work better for what i bought it for(Ipcop router stuffed in an old NES or Xbox 360 case :D ). Google has led me to believe I can power it off a laptop brick with a 2.5mm adapter straight to the p4 connection, but I would rather be sure before I build a cable and blow it up.

Anybody got the right manual or dealt with something similar?
 
Nobody? Bueller?

Ok. I went ahead and figured it out so I'll do a brain dump. Hopefully it will help the next guy.

It does indeed run off the 4 pin P4 header. I pin-jumped an atx power supply and powered it off that P4 plug just to get it running. Then I soldered up a cable to go from a 12v jack to the P4 and it works. I bought a power brick originally for an LCD (12v, 5a, 60w). The male molex next to the battery is output for drives. Why they didn't make this a female is anyone's guess. They include a molex to sata adapter and if the molex on the board were female you could plug straight into it. I had to cobble together a female to female adapter. IMHO this adds unneeded cable clutter for a board intended for small-space applications.

The default BIOS settings make the BIOS lag. I've never seen a BIOS lag before. I had to lower the USB speed settings from high to full to get it to recognize my keyboard & mouse and then the BIOS started behaving. Also under the usb settings you can force a usb drive to act as a hdd or fdd, which I discovered I had to do with my drive to get it to boot the ipcop install. I didn't have to do this for a WIN install created with a multiboot utility, which I forget the name of, not at home right now.

I think that's it. I hope this will do what I need it to. I just need to find a home for it. My kid's 360 is dying so it looks like he'll get a new one for xmas and I can frankenstien the old one.
 
Back
Top