MSI 975x Platinum Issue

korimus

n00b
Joined
Nov 17, 2008
Messages
55
Hello all,

So I have an MSI 975x Platinum Motherboard which has been working great for me for over a year. I just got 4 gigs of new RAM (Patriot Viper 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory Model PVS24G6400LLK) So, I had 2 gigs of Corsair XMS PC5400 RAM. Now, putting the new RAM in I had to change the settings so that it was at 800mhz, and 2.0v (it was at 667 and 1.9 before). Ever since I jhave done this, my built in network card has been getting "limited connectivity" on both my xp and vista partitions. I have the most recent bios and OS drivers for the mobo and network card... So I guess I am wondering if anyone has dealt with this. The only thing I can think of is power, but i have a 650 watt ps, and I never us more than like 480 on it..

Any thoughts?
 
Also I tried lowering the voltage to 1.9 and the timings down to 667, and still the network card won't work right.

And both my xp and vista want to re-activate, so I don't know if that is related to the issue.
 
the southbridge typically controls lan functions but connects to the cpu through the northbridge. maybe 4 gig of ram is too much of a burden on the northbridge so its effecting communication with the southbridge. its also possible that the northbridge is fine but there is something wrong with the memory and that's why communication with the southbridge is being interrupted.
 
I had had one of those boards, too, and had a lot of issues over time (perhaps a result of upgrading to a Q6600; I don't know). I found that most of my problems could be solved by pressing the reset switch. However, after two years of use that board was on its last legs; the USB controller and SATA controller stopped working correctly and I had to continuously reset the board at regular intervals to get them to function again. Speedstep didn't work at all with the Q6600, either, and I couldn't overclock even to 3.0GHz (my previous E6600, on the other hand, overclocked fine).

I'd try pressing the reset switch if you haven't already. I can't offer anything else but a recommendation to get a new board as that model seems to gradually break down.
 
hmm the mobo can handle 8gigs, i don't see how it could stress the southbridge out. Also, i am going to try re installing all my drivers, because i am thinking windows may have gotten messed up. The first time I booted up i had it on 2.1v, and windows crashed while booting. this could be the reason.
 
not stress out the southbridge. the sb communicates with the cpu through the northbridge. the northbridge contains the memory controller and directly communicated with the cpu. if 4gb of ram is too much for the nb then its possible that communication with the sb is less than perfect. if you've tried 8 gb of ram before then the nb is certainly not being overburdened by 4 gb or ram.
 
I got it resolved. Thanks guys. Turns out it was an issue with my ethernet wall plugs. Very coincidental that the problem happened right when i put the new RAM in. All working normally now.
 
Back
Top