Moving WIN98 hdd from old comp to new - possible?

blakangus

n00b
Joined
Jul 12, 2004
Messages
40
Well, I just built my first comp (well, the first one i built for me), with the following setup:

DFI Ultra Infinity rev. A
Athlon Mobile 2200 35w - runnin at 2.4 ghz now at 1.675v - stable on knoppix std.......
1x 512mb stick of Buffalo Tech pc3200 ch-5 chips runnin at 210mhz and 2-2-2-3 timings
Chaintech fx5700le (tight budget, was all i could get) 128mb - will oc it tho
thermaltake (or thermalright?) ax7 heatsink w/80mm blowing on it
thermaltake pp 420w psu
2x 80mm case fans
custom case

anyway enuff with tech specs - the problem im havin is the hdd i was gonna use (an old 10 gig wd) is dead, so now i need a hdd. i was thinkin i could just take the hdd out of my old compaq runnin regular win98 and put it in the box i built....my friend says i can go right ahead and make the switch but im skeptical - pls fill me in all you [H]experts!
cheers! blakangus
 
cant read ur post cause im about to go to bed

hook it up and set ur xp to boot first

i have xp installed on one of my slaves and xp on my mastor no software needed it only loads what u select to load first in the bios under boot priorioty
 
powerade said:
cant read ur post cause im about to go to bed

hook it up and set ur xp to boot first

i have xp installed on one of my slaves and xp on my mastor no software needed it only loads what u select to load first in the bios under boot priorioty

Reading posts helps...

Anyways, I wouldn't take the HDD out of a compaq, and put it in the new comp, running any OS. The drivers, and everything will be different. So you need to format and reinstall on that new/used HDD.
 
do urself a huge favor and get another hard drive. these things are so cheap now and days.

I highly doubt ur old hard drive with win98 from a compaq box will run on ur new system without formatting. Another thing is win98 is FAT32, winxp and 2k is NTFS, more reliable.

So, get urself a new drive and set it as master. Load xp/2k or even 98 if u like. Have your old drive as slave, drag over the files you need to ur new drive, format the old one and use it for storage.
 
what is so important on the old hdd that you'd want to keep win98 around? or is it that you just don't have winXP?
 
blakangus said:
anyway enuff with tech specs - the problem im havin is the hdd i was gonna use (an old 10 gig wd) is dead, so now i need a hdd. i was thinkin i could just take the hdd out of my old compaq runnin regular win98 and put it in the box i built....my friend says i can go right ahead and make the switch but im skeptical - pls fill me in all you [H]experts!
cheers! blakangus

Yes, it is possible to move a drive from another computer running Win98 .... but I don;t recommend it ... the time you will spend prepping the drive, and getting it to work on a new comp is better spent in installing a new OS on it ...
 
primea said:
Yes, it is possible to move a drive from another computer running Win98 .... but I don;t recommend it ... the time you will spend prepping the drive, and getting it to work on a new comp is better spent in installing a new OS on it ...

yeah - it will work.. once - I moved a hd with fresh win98 install from a KT266A based mobo to a Sony VAIO lappy - it did work pretty well, but it was before installing all drivers..
 
i switched my xp hd from my 2500+ rig to this rig and it literly took 3-4 min just to boot up where this one takes about 35 sec, someone said window optimizes itself on install to ur hardware

so grab xp if u can its only 90 bucks oem
 
Back
Top