MotherBoard Issues!

Dwayne25

n00b
Joined
Jul 30, 2007
Messages
11
hi all, new the forums. Well first off i noticed my processor was running real hot in bios(109F),:eek: so i thought i would open the case and detach the HSF from the MB to reseat it. i thought previously that possibly i had put too much thermal compound from the first intial build. i cleaned it off , apply a new dott or so." I Didnt realize till later that i bent a few of the socket pins on Mb" Than precedded to put the HSF back on. It was a rough process to get lined up. I ended up breaking that plastic screw clamps on it.

So anyway, my Questions is do i have to reinstall windows when i receice a Commando motherboard even though my HardDrive wasn't touched?

Thanks :rolleyes:
 
hi all, new the forums. Well first off i noticed my processor was running real hot in bios(109F),:eek: so i thought i would open the case and detach the HSF from the MB to reseat it. i thought previously that possibly i had put too much thermal compound from the first intial build. i cleaned it off , apply a new dott or so." I Didnt realize till later that i bent a few of the socket pins on Mb" Than precedded to put the HSF back on. It was a rough process to get lined up. I ended up breaking that plastic screw clamps on it.

So anyway, my Questions is do i have to reinstall windows when i receice a Commando motherboard even though my HardDrive wasn't touched?

Thanks :rolleyes:

I'm confused. Whats the question?
 
i have to replace the motherboard with the same model. but im keeping the original harddrive with my data on it. can i keep all the data in place without reformating & reinstalling Windows? Keep in mind that ive bent a few socket pins,:eek: thus the replacement.

sorry for the confusion:)
 
if it's the exsact same mobo, you'll be good.
 
i have to replace the motherboard with the same model. but im keeping the original harddrive with my data on it. can i keep all the data in place without reformating & reinstalling Windows? Keep in mind that ive bent a few socket pins,:eek: thus the replacement.

sorry for the confusion:)

Ahh, ok. What OS are you running? The only reason I ask is because of Windows Product Activation. If that doesnt affect you, then theres nothing to worry about.
 
im running windows xp by the way. do i run an xp repair. i didnt see your post thanks!


thanks for your help:)
 
you shouldn't need to, and if all your other parts remain the same, windows product activation shouldn't be an issue either (you'll only lose 4 flags).
 
okay i think i understand now.:eek: i install all the same hardware with the replacement mb(same model) and boot it up as if nothing happened?:)
 
ok so im still in limbo, because if i have to run the sysprep program along with a windows repair. would i still have to install hardware drivers & update/patch windows?

sorry guys bare with me im still learning alittle! its alot of work to do just to have run as smoothly as was from the begining:rolleyes: hopfully its not as hard as is sounds where i can just have everything hooked up & i can go into the windows welcome screen and login with everything showing up with no hardware/sofware conflcts

thanks again! :)
 
Back
Top