Motherboard issue?

fosgate3

n00b
Joined
Jul 20, 2011
Messages
3
First off, it's good to be at this forum and I hope not only to get some help but to also contribute in the future so to assist others in whatever way I can. I'll admit upfront that I have some good experience in some areas of computers but definitely not all areas and especially when it comes to motherboards and obviously the issues I'm facing. So without any further ado, let's get into it.

I'm running Windows 7 Ultimate 64bit with an Intel Core 2 Duo on a DFI Lanparty X48 board. My problems really started about a year ago and I pursued local help to no avail. Essentially, I'm getting random BSOD's with various stop codes and here lately, crashes on WoW (with the Error Codes of 132 and 134), and Shockwave. Google Chrome also started acting a fool last night too with random pages not loading and the Chrome "aw snap" error message. Up until today, I was running an ATI HD 4800 series graphics card. I've also had problems with it crashing too.

Initially, there was 4 GB GSkill RAM (4x1GB) and now there are none. Three of them failed on me and led to loud beeps by the mobo when they were put into the DIMM slots. In a crunch, I picked up some PNY RAM from the local Best Buy (PC5300 instead of the PC6400 that was there). Initially things went well but then the computer crashed again. Also began noticing that it will stop at the POST screen leaving me with the only resort of a hard shut down to get it going. Hitting the restart button, going to the start menu and clicking on restart, or auto restarts after Windows Updates will usually result in the computer stopping at the DFI logo post screen.

At this point, all the RAM has been replaced. I also bought a new ATI card today and installed it. It is an ATI HD 6570. The installation went okay but there were some crashes during the process and a couple of BSOD. I bought a 2GB stick of DDR2 RAM and when I put it in the board, plugged it back in and restarted it, the board beeped. Hard shut down, unplugged, and removal of that stick and everything was okay. I also reset the mobo settings to factory defaults by changing the jumpers.... all this to no avail. In fact, it crashed on me just about 20 mins ago when I was trying to dload a program. I had a movie playing in the background so either that was too much for it or it didnt like my taste in movies.

I tried hard to remember all the stop codes. I wrote most of them down:

0x000000A (<-- most recent one tonight)
0x0000003B (<-- probably the most common)
0x0000001A (<-- probably the 2nd most common)
0x00000019
0x000000109
0x000000C5
C000021A (with a status of 0x00000000 (0x0000428 0x001005W0)) (<-- first one I had documented from 2010 and a PAGE_FAULT_IN_NONPAGED_AREA message)

Sorry this is so long but I felt the more background I could give, the better my chances of someone helping me. I'm thinking its the mobo and was about to order a new board for my CPU and DDR2 RAM by Supermicro until a friend of mine referred me here. So... any thoughts?

Oh also last night and today, I started getting windows popping up when I was on the internet, doing whatever... error messages talking about how something referenced memory in such-n-such area and whatever.... i texted it to a friend and can pull it up if relevant.

thanks so much in advance.

fosgate3
 
It sounds like a bad motherboard. It could also be a bad hard drive unless you've already looked into that. Hell I've even seen bad IDE / SATA cables cause problems like that. Some people will come in here and say "check your PSU dude" or something to that effect, but generally speaking instability like that is not caused by PSU issues. PSU's tend to either work or they don't. Typically you'd be looking at random restarts or random power cycling, shut downs etc. in a PSU failure case. So I don't think it's that. You've already tried different memory modules several times and at least one other video card, which could have been responsible for instabilities since you were playing a game in at least some of the crash instances. Since you've done that already this seems unlikely. as well. As far as I am concerned, you should try a new SATA / IDE cable, and if that doesn't work you should try reloading Windows on a separate hard drive and see if that helps. If none of that works, then I'm going to bet on it being a motherboard problem.

Also, if you are in the market for a new motherboard and you aren't building a server, Supermicro isn't the way to go. Typically they are too expensive and the features aren't really in line with the gamers needs. QVL testing on those boards typically isn't in line with gaming hardware like video cards, sound cards or consumer type memory modules. I'm not saying a Supermicro board wouldn't work, but I think something from ASUS, MSI, or Gigabyte would work better for you.

LGA775 motherboards aren't really made anymore. So depending on your finances you might want to start looking at upgrading to a Core i3 / i5 / i7 based setup using an LGA1155 motherboard. If you can't afford to go that route, (which would require a new CPU, memory, and motherboard) then you may want to hit up the For Sale / Trade section of our forums here and see if you can find a good deal on an X48 chipset based motherboard that will fit your needs.
 
Thanks so much for your reply. I may have a spare SATA drive in some UFP (use for parts) computers. The HDD is a Seagate. Aside from the WoW and shockwave issues, I havent noticed anything obvious that would make me think the drive was faulty; however, I'm not naive to think that it's "a-ok".

After writing this post, I remembered two other stop codes that appeared today when I got a BSOD. They were both "new" to me in that I hadn't received them up until today.

0x00000024
and
NTFS.sys

As for the mobo purchase, the Supermicro board for my CPU and RAM is considerably cheaper than what I've been able to find by anyone else. $159 at newegg compared to over $300 at planet pc for a comparable ASUS or Gigabit. I get paid tomorrow so I'll peruse the HardForum classifieds.

Thanks again for your response.
 
Thanks so much for your reply. I may have a spare SATA drive in some UFP (use for parts) computers. The HDD is a Seagate. Aside from the WoW and shockwave issues, I havent noticed anything obvious that would make me think the drive was faulty; however, I'm not naive to think that it's "a-ok".

After writing this post, I remembered two other stop codes that appeared today when I got a BSOD. They were both "new" to me in that I hadn't received them up until today.

0x00000024
and
NTFS.sys

As for the mobo purchase, the Supermicro board for my CPU and RAM is considerably cheaper than what I've been able to find by anyone else. $159 at newegg compared to over $300 at planet pc for a comparable ASUS or Gigabit. I get paid tomorrow so I'll peruse the HardForum classifieds.

Thanks again for your response.

All your data which is read into memory comes from the hard drive. Corrupt memory can throw bad data to the hard drive and vice versa. Both problems can have the exact same results which include system instability. Again I'd check the cable. I had a bad cable in my HTPC recently and it was literally the easiest fix in the world. I just changed the cable and all was well. Start with the simple stuff first.
 
Have u tried updating Bios of the mother board. It may solve the problem.
Check the manufacturers Website for any bios update also check the mainboard user guide you may find something useful in their troubleshooting guide.
 
Have u tried updating Bios of the mother board. It may solve the problem.
Check the manufacturers Website for any bios update also check the mainboard user guide you may find something useful in their troubleshooting guide.

This is unlikely. The system isn't going to be fine, then suddenly have problems which can be fixed with an updated BIOS. (Assuming the system was fine at some point.) That wouldn't make any sense. Further more, BIOS fixes usually revolve around CPU and RAM compatibility. The guy has been through at least two or three different sets of RAM. That doesn't sound like the problem. And with stability issues as bad as the OP makes it sound, he'd probably end up bricking the board trying to flash the BIOS. You do not flash the BIOS of an unstable system unless you just have no alternative and you are 100% sure that the BIOS update will resolve whatever issues you are having.

That is bad advice IMO.
 
This is unlikely. The system isn't going to be fine, then suddenly have problems which can be fixed with an updated BIOS. (Assuming the system was fine at some point.) That wouldn't make any sense. Further more, BIOS fixes usually revolve around CPU and RAM compatibility. The guy has been through at least two or three different sets of RAM. That doesn't sound like the problem. And with stability issues as bad as the OP makes it sound, he'd probably end up bricking the board trying to flash the BIOS. You do not flash the BIOS of an unstable system unless you just have no alternative and you are 100% sure that the BIOS update will resolve whatever issues you are having.

That is bad advice IMO.

^^ Agreed.
 
I also agree with everything Dan_D suggested.
Keep it simple, swap out the SATA /IDE cable that's connected to your hard drive.

I had a friends PC that just would not play dvd's, windows media player would just lock up. I replaced the dvd drive twice with no positive results, I finally just replaced the SATA cable and the problem resolved itself. Had that bad SATA cable been used for the hard drive it probably would have caused all kinds of strange problems.

If a reinstall of the OS and a SATA cable swap does not help, it's most likely a problem with the motherboard.
 
Back
Top