Motherboard: Blow resistor? Fixable?

Potatocodone

Supreme [H]ardness
2FA
Joined
Jun 30, 2008
Messages
4,859
So I bought a dead ASUS M4A88T-I Deluxe for like $20. Hoping to bring it back to life.

I am a bit experienced with soldering and don't really feel uncomfortable using it. What resistor (or whatever it is) do I need exactly though is where I am lost. Anyone have any idea?

Here is the newegg image:


Uploaded with ImageShack.us

Here is the board I bought:


Uploaded with ImageShack.us

--------------------------------------------

Better pictures here = http://img84.imageshack.us/g/dscn1326e.jpg/
 
Last edited:
It's a capacitor, and if you had a multimeter that can read capacitance you could unsolder another one of the ones nearby (since it looks like they're in an identical circuit), measure, order a replacement, and get it going again.

I've done this before with broken electronics. I've got an Evga X58 3x-SLI board I have to do this to when I get the time as well.
 
That's not a capacitor. It's a resistor. I don't know how you are going to find an identical one though. I've had to do that for video cards and it was a pain because I didnt have the equipment to measure stuff properly.
 
That's not a capacitor. It's a resistor.
What makes you think it's a resistor? I've never seen a resistor that colour.

In my experiance that pale yellowish color usually means a ceramic capacitor. Unfortunately the things seem to come with absoloutely no markings on them :( (as someone who frequenty assembles prototypes with surface mount parts this is VERY annoying).

It's hard to tell what is going on in your blurry pic but it looks like the capacitor may still be there just not on it's pads anymore. Something looks like it is sticking up off the board near where the capacitor was ripped off from.
 
I work at a computer Shop, Let me look and see if I can source that resistor, I have one of those boards in my shop with blown caps. I might be able to salvage something for you.
 
Going to borrow buddy's Nikon to upload new picture. Thanks for your assistance!

~Edit~
Room-mate is out on a date. Won't be able to borrow camera tonight :(.
 
Last edited:
What makes you think it's a resistor? I've never seen a resistor that colour.

In my experiance that pale yellowish color usually means a ceramic capacitor. Unfortunately the things seem to come with absoloutely no markings on them :( (as someone who frequenty assembles prototypes with surface mount parts this is VERY annoying).
Go team capacitor. Ceramic or tantalum.

If the blob in the photo is the molten remains of a catastrophic failure, my guess would be tantalum.

Every small capacitor is 0.1 microfarad... unless it doesn't work. (Not serious advice for a value, but a rule of thumb.)
 
Affirmative on it being a capacitor. Kind of difficult to tell what type and capacitance it may have been with just its remains however.
 
Shoot me pics when you get a second and I would be more than glad to see what I can do.
 
Im interested to know what the person before him was doing or not doing to acclomplish that.
 
Yah well you never know could have been something as simple as a dvd rom drive clearance issue forced it back and snap. You never know.
 
Back
Top