Monitor blanks / goes into sleep mode when running Memtest86+.

Synomenon

Supreme [H]ardness
Joined
Feb 10, 2007
Messages
7,662
My computer's specs.:

Asus P5Q-EM (Intel G45 chipset)
Intel Q6600 Core 2 Quad (G0 stepping)
OCZ 16GB DDR2 800 http://www.ocztechnology.com/produc..._6400-p45_special-vista_upgrade_16gb_quad_kit

Western Digital VelociRaptor
Western Digital 160GB Raptor
LG 20x SATA DL DVD Burner
EVGA GTX260 Core 216 Video Card
TV Wonder 650 Combo PCIe TV Tuner
SilverStone Strider ST85F 850W PSU
Dell 2408WFP 24" LCD Monitor
Dell SP2208WFP 22" LCD Monitor


I just installed the 16GB of RAM yesterday. First thing I did after installing was try running memtest. Problem is, at random times when memtest is running my monitor blanks out / goes into sleep mode. Pressing any keys on my keyboard does not bring it back. I can press the 'ESC' key and my PC reboots.

The problem happens with both the regular memtest and memtest86+ (v1.70 and 2.01).

Anyone know how to fix this or why it's happening? Could it be because my chipset is new (Intel G45) and not supported yet my memtest?
 
I'm guessing that if your monitor is going to sleep, its no longer receiving a signal from your system. Therefore, I'm thinking memtest crashed. You probably need to give a bit more juice to the MCH and/or DRAM voltage (vDIMM).
 
If the "Esc" key still works, then I dont think its Memtest crashing.

Is this ramdom as in " ramdom minutes" or "ramdom hours" into the test ??
You could try letting it soak in a bios screen overnight and see if you still get a signal in the morning.
Try turning any power saving off in the bios.
Try running with a single stick in and see if it still looses vidio output.
Strip any hardware out not needed to run memtest, does it still happen ??

Luck ............ :D
 
If the "Esc" key still works, then I dont think its Memtest crashing.

Is this ramdom as in " ramdom minutes" or "ramdom hours" into the test ??
You could try letting it soak in a bios screen overnight and see if you still get a signal in the morning.
Try turning any power saving off in the bios.
Try running with a single stick in and see if it still looses vidio output.
Strip any hardware out not needed to run memtest, does it still happen ??

Luck ............ :D


The screen blanking would sometimes happen within minutes of starting Memtest, but always before 35 minutes running Memtest.

I think the RAM is the problem. I put four 2GB sticks back in yesterday and ran Memtest for 13 hours with no problems.
 
So I should try upping the RAM and / or MCH voltage? What's MCH? Also, if I up the voltage too much, won't it damage the RAM / MCH or some other components?
 
Yes, it will, so raise it incrementally. What voltage is your RAM made for? What voltage is it set to right now? MCH is the memory controller hub. If you're using all 4 DIMM slots, you'll need to give it extra power since it has a hard time powering that last stick... typically.
 
Back
Top