Mod Request

[TranquilRed]

I'll start off by telling you that I'm in the process of building a new computer for a friend, all parts are being ordered in February and I gave him the option of a possible modded case or a straight retail case, he had decided on a retail case but eventually changed his mind, so I have no clue what case he would like modded, but it should be rather cross-platform.

Ok, so secondly the idea he has in mind is wrapping the Mushroomhead logo around the case, I happen to have a clean picture of the logo:

I'm aware that's a little big, but it's nice and clear. What he would like is to have a case with a front panel. On the front panel He wants the lower part of the smiley face, the mouth depicted and on the sides he wants the two eyes. Any creative ideas would be appreciated and pretty much anything to suggest. Also, what would it cost for one of you to do it and are there any companies that do this sort of thing?

 

[GhengisKhan]

you should be able to blow it up to whatever size you want, print it out, tape the sheets together. Then use it overtop of the panels (all disassembled and layed out next to each other, covered with masking tape) and use an exacto knife to cut out the pattern in the masking tape below the print-out of the pattern. Once you cut out the pattern into the masking tape, just peel back the sections that you cut out and want paint on, then just spray that section, let it dry, peel off the rest of the masking tape, and (as Emeril would say) BAM!!!

*edit* find yourself a case painting walk through for the basics, just insert the section above after the last coat of paint, but before the clearcoat.

 

[TranquilRed]

Thanks, I'll talk it over with him.