mobo's

Joined
Jul 4, 2005
Messages
601
Should I go for DFI Expert SLI, or Asus A8N-32 SLI? And what about AM2, should I be looking at that if I'm going to do some upgrades?
thanks
 
Are you looking to overclock? Also, are you looking for a board with SLI support? I am assuming so. Although, if you do not need SLI support, i would recommend the Abit Nf-m2. It's a mATX but it definitely is worth it
 
iceyJDP said:
Are you looking to overclock? Also, are you looking for a board with SLI support? I am assuming so. Although, if you do not need SLI support, i would recommend the Abit Nf-m2. It's a mATX but it definitely is worth it

Will be overclocking, and I'd like to get SLI, but it won't be right away, just want to have the ability to go there.
 
I also recommend the Abit NF-M2. It doesn't support sli but it's a great board.
 
the asus a8n 32sli deluxe is one great board and easy to set up.
the dfi expert is a very tricky board to set up and very picky with hardware,ram and power supplies to be exact.once set up its good.
the asus o/clocks well and isnt to picky with ram and power supplies. Unless you are extremely good with setting up computers and enjoy the headaches of setting up ram settings then the asus is your likely choise. There are alot of users that love the asus.
there are alot of users that have thrown in the towel trying to get the expert board to work.
You better do alot of reading on the dfi street website on how to setup the expert and what hardware you need to use. Make sure you dont stray from there reccomendations.
the expert is by far the hardest dfi board to setup. The ultra d is alot more friendly.
the asus is a piece of cake. Unless you are going after the absolute max o/clock you can get, the asus a8n 32sli deluxe is one fine board. You should be able to set it up without much trouble,just use good ram and a good power supply and you'll be fine. The asus has alot of settings in bios too but on auto it sets them up better than the dfi....
Dont get me wrong either i am a fan of dfi for a certain type of user but honestly the expert is a handful to work with if your not familar with ram settings and how to set them.
just be aware of the differences in these boards and make your choise. Ive set up both and id take the asus any day over the expert unless i was looking for extreme o/clocks...
 
Man that post just made me picking a dfi expert or the a8n32sli harder. I do want the absolute highest OC for my opty165, but I am a novice OCer. I have been reading the DFI Street forums for some time though.
 
What about the next step down DFI board, the Lanparty UT- SLI? Is that going to be easier to negotiate than the expert. I've only oc'd one machine, I did a lot of reading on it, but I pretty much know the one board I have currently.
thanks
 
If your set on dfi the ut sli would be an easier board to set up. The expert is without a doubt the pickyest and a much harder board to get up and o/clocked hence the name expert. The ut sli is basically an ultra d with sli enabled. You should be able to setup the ut sli board if you have approved hardware. The asus a8n 32 sli board will give you clocks very close to the dfi board though. I have had great o/clocks with the asus board using hardware the dfi boards wouldnt even boot with. Dont under estimate the asus board. With a good power supply the asus will boot and setup just about any type of ram.
As a system builder the one thing i have noticed about dfi boards is alot of premature board failures. They require alot of power to run stable and maybe its just me but Ive quit using dfi for customer builds due to to many board failures in comparison to asus/abit/gigabyte and msi. This is just an observation from my experience though.
Many people on this forum have had good luck with dfi.
Also as a businessman i dont want to keep going over to someones house because their board wont boot every 2 months and then have to tell them they will be out of their rig for 3 weeks while i warranty their board. Asus is hands down the most reliable brand of board i use for customer builds. I very seldom have a board related failure with asus or msi.
Like I said in a previous post the dfi boards are for a certain segment of the computer builders out there.
 
Back
Top