mobo woes

mobomafia

n00b
Joined
Jan 14, 2010
Messages
7
Hi,
Does anyone have any experience running 1066 ram on an n7ad-sli?

I bought them expecting them to work flawlessly since my ram oc setting goes up to 1400.
But i've come to realize this board is full of it.

If i set fsb/pcie sync, clock @ 266 (stock) all power saving stuff off (eist, etc) ram clock auto. bios reports ram @ 533 cpu-z reports ram @ 533

If i set fsb/pcie async, clock @ 266 (stock) all power saving stuff off (eist, etc) ram clock 800 (preset). bios reports ram @ 800 cpu-z reports ram @ 800

If i set fsb/pcie sync, clock @ 266 (stock) all power saving stuff off (eist, etc) ram clock 800 (manual). bios reports ram @ 800 cpu-z reports ram @ 666

If i set fsb/pcie async, clock @ 266 (stock) all power saving stuff off (eist, etc) ram clock 1066 (manual). bios reports ram @ 1066 cpu-z reports ram @ 666

If i set fsb/pcie sync, clock @ 266 (stock) all power saving stuff off (eist, etc) ram clock 1066 (manual). bios fails to POST and reverts to 666 but reports 1066

If i set fsb/pcie sync, clock @ 266 (stock) all power saving stuff off (eist, etc) ram clock 943 (manual) (highest i can get before failing post). bios reports ram @ 943 cpu-z reports ram @ 943

Ive set the voltage to 2.3v, even tried higher and that made no difference, tried loosening the timings and that didn't work either.

Somewhere along the way the fsb and mem clock managed to get locked at 1:1 too

Before i got this ram i had 2GB geil orange things that were supposed to be tested up to 900MHz at stock timings but i could only ever get them to about 845 regardless of timings or voltage.

So, does anyone know how to get my ram running at the advertised speed or failing that can someone recommend a board that will take everything i already have (ddr2 1066, skt775 for c2q) and have truly unlinked clocks that set to the speed they say?

Board: Asrock N7AD-SLI
CPU: Intel Core 2 Quad Q6600 (G0)
Ram: 4GB (2x2GB) Kingston HyperX 1066MHz
Graphics: Nvidia Geforce 9500GT 512MB
Hard disks: 2x Western digital Green 500GB as 1TB RAID0 | 2x Hitachi deskstar 60GB as 120GB RAID0
PSU: Corsair 650TX
Case: Antec Three Hundred
Cooling: XSPC X2O 750 dual reservoir, delta V3 cpu block, RS240 Radiator
 
Last edited:
I would try 333FSB and set dram at 1066. My G0 quad max FSB is 378 so you should be able to do that with a bit of additional voltage to the cpu if your cooling is adequate. Point is some boards don't work correctly with all memory multipliers so this might be a very functional workaround for your system.
 
I took a stab at that. set fsb to 333 unlinked, ram at 1066 but it still run the ram at 666. Even when increasing the fsb to 340 the ram stayed at 666. If iset fsb/pci-e linked, ram at preset 533 or 800 it will follow the fsb overclock. Locking fsb/pci-e and setting ram to manual will let me set whatever i want but won' let me clock much above 940 without failing post. It's weird.

The bios binary has strings in it relating to ram multi's so i'll try modding it. Im too poor to buy a decent board as you can see from my hardware so im going have to start praying to the god's of overclocking and hope they can see to one finding its way to me.
 
Back
Top