mobo will not post

Flavorite

Weaksauce
Joined
Jun 17, 2004
Messages
94
just got a shuttle mn31l nforce2 igp in the mail 2 days ago... was working somewhat fine with the xp mobile 2400+ 45 watt cpu. Ran it at the stock 14x mutiplier and jump the fsb up to 166. I think thats when i started running into problems, mobo would post fine when I hit the power button to turn it on, but when I tried restarting the pc with either the restart button or ctrl+alt+del sometimes it wouldn't post.

Now it wouldn't post at all... monitor will not come on and I think i've reset the cmos with the jumper, but still no post. followed the manual instructions Tried holding down insert and turning the pc on, no luck.

I installed my asus a78nx board with all my new parts and everything works fine. My guess is this board isn't the best when it comes to OC'ing. THis is for a friend, who only need a geforce4 for a video card...

I really don't wana sent this board back, anything i've over looked. I really think I'm doing something wrong when reseting the cmos?

unplug power
hit power button to clear caps
change jumper
wait
change back
plug in
power on
 
Reset the BIOS this way:

Unplug the computer
Remove the battery
Switch the jumper to reset position and wait for 5 min
Switch the jumper back
Replace battery
Plug in/turn on computer
 
Well, I tried what was suggested and no luck...

Tried different power source..
Tried reseating the cpu and adding more paste
tried useing ram, power supply, video, cpu, and memory only
tried the board out of the case, to check for shorts
removed battery for 6 hours
tried holding insert when powering on

I thinks thats it...

asus board and all other components are still running srong... I think i'll just rma it, this board is giving me a headache. :(
 
Back
Top