Mobo Installation Disks

Benny Blanco

2[H]4U
Joined
May 4, 2003
Messages
2,609
I've been building/messing with computers since 2000, and in all the dozen or so Ive built, and another dozen or so I've fixed/rebuilt for others, I don't think I've ever used or even looked at what's on the installation disc. If I even keep such a disc, it's just in case I decide sell the board on ebay or something.

I just helped a friend get a new rig up and running and found that the chipset drivers from AMD's website for the 8 series chipset just didn't work. We had to go to ECS's website and get their mobo chipset drivers. This is something I pretty much NEVER do, but we had no choice, as nothing we tried from AMD worked. In fact, we experienced a similar situation with one of his video cards too, which just happened to have an ATI chipset.

SO, I do this process of going to the manufacturer's site for basically ALL additional components which need drivers (chipset/SB, audio, LAN, VGA, SATA/E-SATA, etc). It is certainly more work and more time consumed in the end. Am I wasting my time? Should I just use the factory/manufacturer drivers?
 
Going with drivers provided by motherboard manufacturer saves some time initially as we do not have to hunt down proper drivers from component manufacturers. Updating all the drivers later on is always a good practice tough.
 
I suppose if you have no other option you can use the drivers on the disc that came with the mobo, but the tech geeks always claim they are outdated before the mobo even ships, so who knows. If they get you up and running without issues and save a wild goose chase on various manufacturer websites it certainly wouldn't hurt, but by the same token updating them after the fact becomes a tedious process anyways, so no matter how you slice it you have to find drivers before or after, so it's kind of a wash.

I started dabbling with a software package called "Driver Finder" a few months ago and it's mostly been okay, but there were a couple of drivers it recommended that hosed me up big time. I still do not believe Windows has all of the driver issues worked out with Windows 7 yet as there are a couple of niggly drivers I've given up hope on and just use an older one because it works. I hope WIndows 8 is a vast improvement over what 7 has to offer because I haven't been that impressed in all honesty. It's worlds better than XP that much I know. I had better luck with Vista than I've had with 7, but it still needs work that will hopefully be addressed in SP2 or at some point in the not too distant future.
 
Most newer motherboards are installed just fine with windows 7. You might need an inf update for intel, or amd chipset identification software, but the headaches of ACPI/Sata/Stop error 07 BSOD's are in the past. At least a bad driver install does not take down the whole shebang, like windows xp.
 
SO, I do this process of going to the manufacturer's site for basically ALL additional components which need drivers (chipset/SB, audio, LAN, VGA, SATA/E-SATA, etc). It is certainly more work and more time consumed in the end. Am I wasting my time? Should I just use the factory/manufacturer drivers?

No.
You're still getting the files from the manufacturer, but by going to the site you're getting ones that are more up to date.
You'd be wasting your time if you were doing it the other way around (installing off CD then going to manufacturer site and installing those also).

For all intents and purposes you can generally throw away any disc that comes with hardware unless it comes with software (and even then, it's still probably nothing useful). I hold onto the discs for completion's sake, and in case I sell the item and the buyer may or may not have the ability to download the newer drivers or software....but if it wasn't for that, I'd just chuck all the discs in the trash.
 
Back
Top