![[H]ard|Forum](/styles/hardforum/xenforo/logo_dark.png){kind=logo}
BoogerBomb
Supreme [H]ardness
- Joined
- Jan 10, 2003
- Messages
- 6,470
Amd AthlonXP 2500+ Barton (333)
Thermosonic Thermoengine with GlobalWin 8000RPM fan
Temps are 42C idle, 46C tops under load.
Abit KD7A
Corsair DDR400 XMSPro with the lights
Enermax 450W PSU
Radeon 9800Pro
I can only up the FSB from 166 to 170 tops. Anything above 170 will result in a no post no matter what voltages are applied. I have even tried lower multiplier settings but its stuck at 11x no matter what I do according to CPU-Z.
I dont have the option for 6:2:1 ratio for the FSB and think that may be what is holding me back. What do you guys think? I have maybe $100 to get a new motherboard and just hate shopping around because I have to check every review on perspective boardsd and by the time I choose a better one comes out.
Thermosonic Thermoengine with GlobalWin 8000RPM fan
Temps are 42C idle, 46C tops under load.
Abit KD7A
Corsair DDR400 XMSPro with the lights
Enermax 450W PSU
Radeon 9800Pro
I can only up the FSB from 166 to 170 tops. Anything above 170 will result in a no post no matter what voltages are applied. I have even tried lower multiplier settings but its stuck at 11x no matter what I do according to CPU-Z.
I dont have the option for 6:2:1 ratio for the FSB and think that may be what is holding me back. What do you guys think? I have maybe $100 to get a new motherboard and just hate shopping around because I have to check every review on perspective boardsd and by the time I choose a better one comes out.