mobo can't find my HD!

binkgle

Limp Gawd
Joined
Oct 16, 2004
Messages
161
yesterday i was using my computer, which was happily and stably running. my parents called me down for lunch, so I shut comp down. came cak up 45 minutes later, bios can't find a had drive on the ide channel it is suppossed to live on! I can't get past the boot, becasue allegedly there is no HD in my comp! I've tried resetting the bios, reconnecting all cables between HD, power supply, and mobo... HD was producing no odd noises, had been acting perfectly well. I have not had to open my case for about a week, so I doubt it was that. What should I do? The only other desktop computer in the house is my bro's sff, which is impossible to work with hardware-wise, so I can't test the HD in that. what happened?
 
well, you need to get that drive reciognized at the BIOS level before any diagnostic or recovery efforts can be made

as to the root cause, anything from shipping or integration damage
to environmental damage (temperature, power, vibration\shock)
that is if the drive is indeed the problem, it could be the cable, that power lead, or the channel on the mobo
 
just two possibilities
1.
underated as the most common cause of surges on a house circuit would be any huigh draw motors that turn on and off, like an Air Conditioner or a refrigerator, these over time incrementally kill Metal-Oxide Varistor surge protectors, and given enough time computers hooked to such protectors, how well a power supply is able to deal with that is variable
over time a cheqa supply might start letting through overshoots (voltage past the 5% varience allowed under the spec, like a 13V surge on the +12V rail) since HDD are connected directly to the power supply, unlike the CPU, RAM and Cards which have a buffer in the mobos own Voltagre Regulation Modual (VRM) they can often be the first sign something is wrong
http://computer.howstuffworks.com/surge-protector.htm
http://www.dansdata.com/sbs9.htm#ggviewer-offsite-nav-12464416
http://brickwall.com/nofail.htm


2.
size of human hair 76 microns
fly hieght of a HDD's head 2 microns

Head Slap

"Head slap is when the actuator arm/read-write assembly impacts the platter due to a shock such as a tip-over, a tap with a screwdriver, or an overly aggressive shove to get the drive into a bay. This can also occur if you try to scoot the box across your desk while it is running

As a result of the impact, tiny indentations can be formed. The material ejected from this impact is scattered about the disc, and when the drive is powered up the heads will pass over this indentation and the ejected material. This can be the equivalent of running over a bowling ball in a go-cart traveling at Mach 813."

from the seagate link above
 
there are no grinding noises or anything from HD. the only other things on the used surge protector are the monitor, my router, my cable modem, and my printer. two ports left empty. nothing on the other port of outlet on wall.
 
grinding isnt required
a wee little bump, sometimes between when it was made and now is all that is needed
all the worse if it was spinning at the time

and as far as the surge protector goes, what is currently attached isnt all that important
its what quality protector it is, how old it is, and how dirty a circuit it has to deal with for source power

try it as the only HDD (a master on the primary IDE channel)
with a new cable
and if available use Force Update ESCD in the BIOS

what PSU do you have and what is your full config
(is this the system in your sig?)
 
my sig has the latest specs for my rig. the hd is the master on the primary ide channel, it's always been that. i'll try the escd thing
 
wanted to post some screenshots, but can't figure out how. how can i get you guys some screens?
 
hmm. unplugged and plugged back in the ide cable. didn't work. turned off. 15 minutes later turned on and it worked. i don't get it. any ideas?
 
Sounds like your HD is dying. Read your smart settings. If they are bad then Back-up anything improtant and RMA it. if not i would probably RMA it still.
 
happened again tonight. came back from school and voilà same problem. tried everything i did before. at least last night i managed to back up everything onto bro's comp. what are smart settings?

i think i need a new hd. recently the mobo on my gateway died, so i used the occasion as an excuse to overhaul every part of mycomp except hd and optical drives, even case. it's a maxtor drive which (as far as i know doesn't appear on maxtor's site. it's model 6Y080L0.

i want either an 80 GB or 120 GB hd. don't have money fora 10K rpm raptor (if only, if only). must be 7200 rpm, preferably sata. at least 8 MB cache. any suggestions. need speed and reliability.
 
binkgle said:
happened again tonight. came back from school and voilà same problem. tried everything i did before. at least last night i managed to back up everything onto bro's comp. what are smart settings?

i think i need a new hd. recently the mobo on my gateway died, so i used the occasion as an excuse to overhaul every part of mycomp except hd and optical drives, even case. it's a maxtor drive which (as far as i know doesn't appear on maxtor's site. it's model 6Y080L0.

i want either an 80 GB or 120 GB hd. don't have money fora 10K rpm raptor (if only, if only). must be 7200 rpm, preferably sata. at least 8 MB cache. any suggestions. need speed and reliability.

If you install a Program like Speedfan it can read the condition of your harddisk. Under S.M.A.R.T.

As for going for a High density 7200 Disk. then may I suggest the Maxtor diamondmax 10 - Which has 16 Meg cache. Or the Dimondmax 9 which has 8.

I'm actaully a bit for a WD Freak and I do like my WD drives, but for you need's and a signle disk arrangement you can't beat 16 Meg cache.
 
those maxtor drives sound great (and look it, too, on newegg). parents probably won't allow the purchase of a $200 drive without a good bit of coaxing. any other, cheaper suggestions?
just spent $800 on comp overhaul, and, unless i do a lot of babysitting,i won't be allowedto pay another $200 for a while. how much of a speed difference would 16 MB cache make ov 8 MB?
 
thx. any more opinions, i want as much feedback as I can get before i order (hopefully tonight, possibly friday, definitely not tomorrow, thanksgiving)
 
Back
Top