Misc. PCB's and corrosion...

Joined
Dec 9, 2005
Messages
2
Hi all,

I didn't see any other threads address this directly, so here goes...

I have a Z64 and it has a little motherboard-like PCB as the main componant, well, somehow it seems to have gotten some kind of corrosion on it which I think (hope) is causing it to not function correctly (freeze-ups and random resets).

Anyway, my question is, what's the best way to clean PCB's that yeilds the cleanest results? I tried alcohol, it didn't seem to work as I'd hoped, seemed to leave behind a residue...Any suggestions so I can get my poor Z64 back to normal would be greatly appreciated. Thanks in advance.
 
By corrosion what do you mean, like oxidation or like acid?

Typically PCBs should be "laminated", to prevent corrison when they are printed.
 
Sorry, perhaps corrosions wasn't the best way to describe it, it is more like oxidation, like a brownish-colored residue around many of the contacts and surface of the board, but yes, it is laminated, and I was able to clean some of it off with alcohol, but not all of it, and the alcohol seems to have left behind a residue of its own.

I'll see if I can post a pic. of it...

Also, someone somewhere else mentioned "acetone baths," but I'm not really sure what that is, exactly, rather the process of it...If anyone knows anything about that, too, feel free to divuldge. :)
 
Can't beat the stuff from CAIG Labs. I keep DeOxit, ProGold, and Cailube on my bench all the time. This stuff is the best...:cool:

Regards - B.B.S.
 
Paul_Bunyan said:
Sorry, perhaps corrosions wasn't the best way to describe it, it is more like oxidation, like a brownish-colored residue around many of the contacts and surface of the board, but yes, it is laminated, and I was able to clean some of it off with alcohol, but not all of it, and the alcohol seems to have left behind a residue of its own.
It sounds like you have flux residue on the PCB. If it's flux, don't worry--it won't have any effect on your circuit, and is totally normal.

Pictures will be a big help.

 
Back
Top