• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

mini dp cable pinout?

C

cyclone3d

Fully [H]
2FA
Joined
Aug 16, 2004
Messages
18,176
I am trying to replace the cable on my active mini-dp to DVI adapter.

Removing the casing and potting was a real paint, but I finally got it all off without damaging anything.

What I am having trouble finding is the actual pinout of the mini-dp connector.

I have found places that say pin 1 is in the upper left hand corner when looking at the end of the cable, and I have also found places that say pin 1 in the upper right hand corner when looking at the connector.
https://developer.apple.com/softwarelicensing/agreements/pdf/MiniDisplayPortConnectorDimensions111908.pdf

http://apple.wikia.com/wiki/Mini_DisplayPort

I would think that the pinout would be the same as when looking at the end of a standard dp cable, but do not want to fry something if that is not correct.

Does anybody know for sure where pin one is when looking at the end of the plug on the cable?
 
chx said:
The thing is, most pictures show the receptacle, check for eg page 5 in the PDF. Somehow the plug is numbered differently. See http://pinoutsguide.com/Video/mini_displayport_pinout.shtml here as well.
Click to expand...

Ok, thx. I had actually looked at the page you linked already.

But.. after experimenting with my passive adapter from Monoprice, and looking at the regular DP pinout, I think I have figured it out.

So.. pin 1 is in the upper left hand corner with mini-DP. I verified that with the monoprice adapter as well since the circuit board is actually labeled correctly for a mini-DP cable.

The active adapter I have is by Wieson.

It turns out that the numbers on the circuit board are labeled for the pinout of a normal sized DP cable. I am pretty sure that is why I was totally confused before.
 
You must log in or register to reply here.
Back
Top