• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Mini-Barebones - Performance?

I would just feel dirty owning a boxen that wasn't OC-ed :(

If your the nice and tidy type it be great.....

I'll save a few bucks and mount naked board on cardboard before I give up OC capability.

Also.... The PSU in that thing. What is it's rating. I'm trying to get rid of all my PSUs that are under 80+

 
Evil,

Is all you would need for the shuttle is a CPU, Memory (2 x 1GB or maybe even 2 x 512MB), & a cheap CD Drive (using notfred's CD)?

How is cooling on these? Can you stick a Quad in one?

 
Evil,

Is all you would need for the shuttle is a CPU, Memory (2 x 1GB or maybe even 2 x 512MB), & a cheap CD Drive (using notfred's CD)?

How is cooling on these? Can you stick a Quad in one?

Cooling in a shuttle is very good. I used to fold with an OC P4 3.0 Prescott in one. The main issues with shuttles is their quality control, they always seem to have one or two quirks.
 
Yeah, I also read the cooling was good on the shuttle.

I might have an idea .... just maybe
"I so smart ... i can't even begin to understand what I am possibly thinking about doing"

 
Yeah, I also read the cooling was good on the shuttle.

I might have an idea .... just maybe
"I so smart ... i can't even begin to understand what I am possibly thinking about doing"


This is very very dangerous! :eek:

 
Yeah, I also read the cooling was good on the shuttle.

I might have an idea .... just maybe
"I so smart ... i can't even begin to understand what I am possibly thinking about doing"


Pad mod a Q6600 and you have a 3.0 over clocked cooler running shuttle. At most you can get away with a very slightly higher VCORE and run dual SMP.

Low power cost, minimal heat and lots of points, hard combo to beat. Oh, they stack well too.;):D


 
So what is Pad mod? I was thinking I might pick up a couple of these and put a Q6600 in there with cheap RAM and a really cheap HDD or just go with a CD Drive. You could do the entire thing for under ~$600

 
So what is Pad mod? I was thinking I might pick up a couple of these and put a Q6600 in there with cheap RAM and a really cheap HDD or just go with a CD Drive. You could do the entire thing for under ~$600


+1

Does the pad mod change the multi or the FSB?

 
Intel Core 2 Quad Q6600 Kentsfield 2.4GHz OEM

$239.99


CORSAIR XMS2 512MB 240-Pin DDR2 SDRAM DDR2 675

$19.99 -$10.00 Instant $9.99


LITE-ON Black SATA CD-ROM Drive Model LTN-52S1S-10 - OEM

$13.99

Shuttle SG31G2 Intel Socket T(LGA775) Retail

$244.99 -$15.00 Instant $229.99

Subtotal: $503.95 Not too bad for a little Folding Rig
 
Intel Core 2 Quad Q6600 Kentsfield 2.4GHz OEM

$239.99


CORSAIR XMS2 512MB 240-Pin DDR2 SDRAM DDR2 675

$19.99 -$10.00 Instant $9.99


LITE-ON Black SATA CD-ROM Drive Model LTN-52S1S-10 - OEM

$13.99

Shuttle SG31G2 Intel Socket T(LGA775) Retail

$244.99 -$15.00 Instant $229.99

Subtotal: $503.95 Not too bad for a little Folding Rig

That will work just fine. Save 5 bucks and get a G0 here:

http://www.clubit.com/product_detail.cfm?itemno=CA1938460

And, on my headless boxen I don't bother with an optical drive, I just move it from box to box as needed so that's another 14 bucks.

That little box will produce 2 work units a day, good move;)

 
That will work just fine. Save 5 bucks and get a G0 here:

http://www.clubit.com/product_detail.cfm?itemno=CA1938460

And, on my headless boxen I don't bother with an optical drive, I just move it from box to box as needed so that's another 14 bucks.

That little box will produce 2 work units a day, good move;)


Well, ordering it from Clubit would save me the 9.025% sales tax we have here in TN.

As fas ar the optical drive, kinda yes and no .. seems like your method would be a pain in the butt if you have to restart the farm..

If I just used a USB drive for boot, would save about $10 + ..easy install + backup .... as long as that chipset supported USB Booting

 
Just to re-confirm what I think... Going for 1GB (2 x 512) is gonna be my best bet correct?
I think 512 would not be enough .. plus I get dual channel performance.

 
Just to re-confirm what I think... Going for 1GB (2 x 512) is gonna be my best bet correct?
I think 512 would not be enough .. plus I get dual channel performance.


2 Gig for sure for dual channel then in your config set the RAM to 512, works great;)

 
Instead of hardrive and CD-rom; why not go with a 5 or 10 dollar USB drive?

Put one of those Linux on it
 
Hmmm. I hadn't thought about the USB version of all of this. A full install of centos was only 4GB and you could create one "image" and then just copy it to a bunch of USB Drives and then just boot and let 'er rip.

 
LOL ... real funny mr B

Actually I wasn’t kidding. In the client config I preset max RAM to 512. Trust me, it does work great.

As to your previous thread about having to shut down………..unless there is a client change or a massive power outage I don’t shut down. I’m not running from a cd though, I do use hard drives.;)


 
My Micro ATX with ASUS P5E-VM HDMI reaches over 400FSB.
My E6600 for the first time ever is stable at 3.6Ghz allowing me to run 1:1 with the 800mhz DDR2
I also managed to fit a TRUE HSF with dual fans on it.

The 2nd picture in the gallery is my Micro ATX that is serving as my Home Theater PC as well.

http://www.flickr.com/gp/24842648@N02/hG2kh6


 
Back
Top