Mini ATX for OCing?

CrimandEvil

Dick with a heart of gold
Joined
Oct 22, 2003
Messages
19,670
Welcome back everyone, been waiting to ask this since the board went down:
Anyone recommend a few M-ATX with OCing functions? Looking for AMD suggestions but will take Intel, Thanks!
 
Iv been doing some research on this, it seems the newer ASUS boards are pretty good, but only have 2 phase power... :(

the best would be the old version Epox, there is a newer one out its the one at newegg, im not sure the model of the old one im loking for a site to but one right now... ill let you know
 
I have the Gigabyte GA-8IG1000MK (i865g) that I got from the Egg. It is running my 2.4c (m0) at 3.0. Can probably go higher, but it's in my HTPC and don't want to generate too much heat. FSB adjustments only on the board though, no vcc. I am, of course, overclocking through BIOS, but it will also allow you to tweak with EasyTune within Windows if you so desire.
 
dose anyone have the first version epox Nforce2 mATX? I hear that is a good board..


You will have to search thru some reviews, but i think the newer ASUS board have overclocking in BIOS...i think its liek version 7.x or x.7 or somethin...

EDIT: I will be buying one shortly, rememebr this, if you can get one with ultra400 on it, or one that states it will run 200fsb, you can allways PIN mod your CPU to whatever multiplyer you want you dont need BIOS overclcoking Options, you can also mod you CPU to run higher voltage by default......

if the BIOS dosnt have voltage reading you will have to use a multimeter on the board to find out if you voltage are what you want... i may just go with this, and get the newer Epox baord...


EDIT #2, it seems none of the current mATX baords have 3 phase power...there all on 2 phase, this will hinder high voltage overclocking, i would say anyhtign under 1.85 would bee fine though... I looked around and the old version of the epox is the only mATX that had 3 pahse power....

"dose anyone know the model of that board?"
 
Shuttle MN31N is a great board, i'm almost positive it has FSB adjustments, but no multiplier adjustments (i'd have to check again, it's sitting in a box next to me right now)

It's an IGP board, and i'm not sure if it has 3 phase power (i dont remember there being voltage adjustments)... A simple pin mod should allow you to get up there...

If you want to know what options it has just reply here or gimme a PM and i'll plug it in and check it out
 
I have one of the Albatron KM18G Pro boards, its an ok NF2 overclocker. I get up to 190MHZ FBS on my CPU.

For a cheapy with overclocking options, I got one of the ASRock K7S41 boards. FBS up to 250 if I remember correctly, multi control via jumper and a +3%/+6% core voltage selection.
 
I'm trying to find one that has CPU adjustments so I can use a Mobile, Intel side pretty much a stable board that has some OC functions.
 
Back
Top