Microsoft Pulls Windows 7 Download Tool

HardOCP News

[H] News
Joined
Dec 31, 1969
Messages
0
Well this sucks. Anyone wanting to upgrade a netbook (or similar PC without an optical drive) is SOL until Microsoft straightens out this mess with the Windows 7 download tool.

"Microsoft is looking into this issue and is taking down the (Windows 7 updating) tool from the Microsoft Store site until its review is complete," the company said in a statement. "We apologize to our customers for any inconvenience."
 
Last edited:
good that they pulled it just in case they are violating the gpl
 
Why would they be SOL? The tool might have been a bit handy, but I'm typing this from a netbook I just tossed Windows 7 on yesterday from a flash drive. If someone doesn't already know how to make a bootable flash drive, there are tons of guides out there, including one on our own forum. ;)

http://www.hardforum.com/showthread.php?t=1381323

I love using a flash to install it on systems even if they have an optical drive. The install time is cut down to about 15 minutes or less if you have a decent drive. It only took 20 on this netbook.
 
Page Not Found, btw.

And yea, there are thousands of "How to install Vists/7 from a flash drive" searchable via Google. Even one that I wrote right here on this forum.
 
cmd
diskpart
list disk
select disk <usb flash disk #>
clean
create partition primary
select partition 1
active
format fs=ntfs quick
assign
exit
xcopy <7 disc letter>: <flash disk letter>: /e /h

reboot, install, profit.
 
This has worked pretty good for me so far. I'd imagine it would work for windows 7.:)

The thumbdrive method? I can confirm it works. I do that myself. It installs Win7 on company computers sooooooooooooo much faster than DVDs.
 
cmd
diskpart
list disk
select disk <usb flash disk #>
clean
create partition primary
select partition 1
active
format fs=ntfs quick
assign
exit
xcopy <7 disc letter>: <flash disk letter>: /e /h

reboot, install, profit.

i dont think it works, creating a partition and active it != bootable, bootable means there is a bootstrap to locate the code load it to memory and then execute the loaded program.
 
You just need to navigate to the install folder of your media, and use bootsect to load it onto the thumb drive. So it would look something like this:

D:\Boot>bootsect.exe /NT60 E:

Assuming D is your DVD and E is your flash drive. I know it works, I've done it many times.
 
i dont think it works, creating a partition and active it != bootable, bootable means there is a bootstrap to locate the code load it to memory and then execute the loaded program.

It works, done it dozens of time. Try it yourself.

The only catch is you have to do it under Vista or 7. I don't know why, but doing it from XP won't work.
 
You just need to navigate to the install folder of your media, and use bootsect to load it onto the thumb drive. So it would look something like this:

D:\Boot>bootsect.exe /NT60 E:

Assuming D is your DVD and E is your flash drive. I know it works, I've done it many times.

Exactly how its done in my Guide in the OS subforum. It does indeed work and you don't need to mess with diskpart.
 
You just need to navigate to the install folder of your media, and use bootsect to load it onto the thumb drive. So it would look something like this:

D:\Boot>bootsect.exe /NT60 E:

Assuming D is your DVD and E is your flash drive. I know it works, I've done it many times.

You don't need to do that if you're running Vista (or another install of 7). Formatting the partition with diskpart and setting it active is all that's required and works every time. The bootsect thing is good to know for people doing this from XP or other OSes, but otherwise completely unnecessary.
 
Exactly how its done in my Guide in the OS subforum. It does indeed work and you don't need to mess with diskpart.

Diskpart is simpler than your guide, please quit pimping your "guide" which is all over the internet. You made a post on how to do something, we know :rolleyes:
 
Diskpart is simpler than your guide, please quit pimping your "guide" which is all over the internet. You made a post on how to do something, we know :rolleyes:

:confused:

I wasn't even the first to mention it so... not sure where you are going with that. Regardless, both methods are via the command line and the method I chose to document here is less steps so again... not sure where you are going with that argument either.

Defensive much? haha
 
:confused:

I wasn't even the first to mention it so... not sure where you are going with that. Regardless, both methods are via the command line and the method I chose to document here is less steps so again... not sure where you are going with that argument either.

Defensive much? haha

Sorry, you're right. Just having a bad day.

Either way is equally simple, imo. I was mistaken to say diskpart is "simpler" but it's preferable to me. setting the partition active is the only part that matters anyway. You can format and copy the files via the GUI, it makes no difference. I would imagine the same is true of the bootsect method.
 
i dont think it works, creating a partition and active it != bootable, bootable means there is a bootstrap to locate the code load it to memory and then execute the loaded program.

It does work. It's the only way I've installed Win7. Ever.
 
Wow this made alot of sense. I was seriously downloading Windows7 last night and when it hit 49% I got the message "The file your are downloading cannot be found on the server!"
 
I have been using this tool. its nice I like it. very convenient. (I know its not hard otherwise, but this just makes it so you can just click a couple things and boom done).
 
I think it was pulled because the underlying code for the USB tool violated the GPL license or something. It was reported on Engadget or DownloadSquad sometime last week.
 
Well, I actually ha difficulties with the Microsoft tool recognizing/allowing legally downloaded copies of the last beta releases (7231/7232), so I went back to using UltraISO.

With UltraISO:
- Open the image of Vista/Win7 with UltraISO
- Under BOOTABLE tab choose WRITE DISK IMAGE
- Choose your USB stick under "Disk Drive"
- Choose a method (It's recommended to use USB-HDD+)
- Press Write

;)
 
Back
Top