Micro ATX Mobo in Cooler Master Stacker Case.

Micro ATX motherboards fit into ATX cases with room to spare. YUO CAN DO IT :D
 
Yeah, any mATX board will fit in an ATX case. I have the biostar m7ncg 400 as well, but it is in an Aria. What FSB were you able to get that up to? I can't seem to run it higher than 175mhz without having problems even though my CPU is only at 39c and no matter how high the voltages.

Anyhow, I have the stacker case too and I love it :)
 
tybo sounds about right. Are u guys sure about the cooler master? IT seems that some1 posted on the reviews that there could be problems with micro-atx boards. I think its a Batx cae...
 
ill go along with the other guys
a mATX mobo will fit into any ATX form factor case.

form factor whether it be ATX mATX , NLX, or whatever, follow an industry standard for shape and measurements. all case and mobo makers have to follow that standard. if this case designer has issues with mATX mobo;s then the case is built wrong and you should go look at buying a different case.
now, an NLX mobo only fits NLX case but any style of ATX will fit in an ATX case but of course an ATX wont fit into an mATX case. lol but you see what i mean.

by looking at that case, the rear panel, PCI slot covers and general shape, it appears that there should be no problems fitting a mATX mobo.
 
The CMStacker is an ATX case. It is convertable to BTX by moving some of the parts around, but when it arrives at your doorstep is it setup for ATX use. I'd try to show you that it should fit... but taking my Biostar board out of my Aria is out of the question.... it took me a while to actually get that in! :eek:

[Edit]Oh yeah, I just corrected a mistake in my sig that I am not sure if anyone caught... I put that I had my ASUS A7N8X-Dlx in my Aria :p It is actually in a Lian Li PC61[/Edit]
 
thanks tybo that wont be neccesary as I too have the Aria but ditched it in favor of the Sonata. Aria was way too loud and hot...

I guess im going to get the stacker and have that board in there. Thanks every.
 
maxse said:
thanks tybo that wont be neccesary as I too have the Aria but ditched it in favor of the Sonata. Aria was way too loud and hot...

I guess im going to get the stacker and have that board in there. Thanks every.

Yeah, the Aria was hot when I first got it. My friend and I cut holes in the two sides for cross ventilation. I have Zalman slim fans running on the 5V line so they are very quiet. My cpu was not running hot so I used a voltage regulator on my Vantec Aeroflow HSF so it runs at 3000rpms, also very quiet. My 2500+ runs at 36c idle and 45c load. Case temps dropped from high 40s load to mid to low 40s after the mod.
 
Back
Top