• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

memtest86 ver 3.0

N

ne0-reloaded

[H]ard|Gawd
Joined
Jul 1, 2003
Messages
1,216
im trying to see how stable my ram so im using memtest86. ive never used it before so i just wanna make sure im using it right. once u get the files on the floppy, u boot off of it and make it run right? i let it run over night and out of 22 tests i had errors in 13 of em (or something like that). when ur ram is running the way is stable, ur not supposed to get any errors, right? also, my vdimm is at 2.6v, will going up to 2.8v be too much (my mobo maxes out at 2.9v, and im on air w/ no ramsinnks)?

thanks

2X512 PC3200 Corsair Value Select
 
Ramsinks won't do a whole lot if you've got decent airflow in there... The voltage that your RAM will accept depends on the particular stick even more so than the mobo, should be safe to bump it up a few notches to test.
 
You must log in or register to reply here.
Back
Top