daddybigwords
Limp Gawd
- Joined
- Jul 2, 2004
- Messages
- 145
I have a GA-K8NSNXP-939 (link) in a system I just built. I have flashed the BIOS to the latest version. I have 2 sticks of DDR 400 ram in slots #1 and #3. It *should* be running dual channel at DDR 400. However CPU-Z shows that I'm only using one channel and says that my ram is running at 157.9 MHz. Is CPU-Z wrong? If not, how do I change the speed my ram is running at? There don't seem to be settings in the bios for ram speed / timing / etc.
Thanks in advance for your help.
Thanks in advance for your help.