• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Memory holding me back?

It was set to auto. I have bumped the voltage to no effect, I have underclocked the memory as well and still nothing. Right now I'm just chillin at 3.990 because it refuses to handle a 200mhz BCLK.
 
What temps are you getting on your cpu?
Have you tried a burn in test like linpack, prime95, or OCCT ye?
 
Yes, its prime95 and intel burntest stable. I'm guessing it just wont do over 4ghz either.

Temps under prime95/intel burntests are 75c, idle at 40c.
 
try 195x21 (if it post) then try
201x21 (up to 205) if it still wont post then you are limited to a 200blck.

imho your volts is enough (mine is fine 4.2ghz with 1.25v)
try to set the max volt of your mems (ie 1.65) and set it to auto.

i have an r2e that can only post up to 220 blck.
same with my new r3e too post up to 220 :( (others have passed 225-230)

as what blu3phoenix said tell us what bsod error you get (usually i get 101 - not enough vcore, 123 then you need to up your juice for the mems.)
 
You must log in or register to reply here.
Back
Top