Max voltage I should use

zeroARMY

[H]ard|Gawd
Joined
Feb 22, 2003
Messages
1,195
I have an Opteron 170 and it is air cooled by a Thermalright XP-90 w/ Arctic Silver 5 & 90mm Panaflo Fan.

What is the max safe voltage I should run with this cooling setup? My case is also kinda small, so air flow isn't that great.
 
i think about 1.6 is as far as i'll go with a single or dual core opty

it's probably safe to go to 1.65 if your cooling is good

i only do about 1.45 though for "everyday clock"
 
How do you know the actual voltage, is the bios reading accurate? Are the utilities accurate? I'm using Epox's monitoring utility.
 
1.6-1.65 on exotic air(like big typhoon)

1.7 on water

with my 3000+ i run 1.7v for everyday clock
 
I use 1.58 volts for 24/7 operation (right now stable at 2970 MHz but I am fooling around with some new beta BIOS's to see if I can run over 3GHz prime stable at the same voltage) with max processor temps under load at 49 degrees celsius. For benching I'll go as high as 1.65 depending on temps which I never let exceed 55 degrees celsius under full load.

I use Smart Guardian and Everest to monitor voltage and temperatures. Generally I find that the volts reported in the BIOS tend to be higher than those reported by monitoring software. I think that this is true of most Expert boards - i.e. they tend to undervolt what is reported in the BIOS).
 
Back
Top