Max load/temp on AMD-FX53 - is 49C good?

jpinard

Limp Gawd
Joined
Oct 10, 2004
Messages
194
I've been overclocking my processor tryign to find it's outer limits. I'm a little new to doing anything other than adjusting FSB... so I got what I thought was one of the best cpu coolers on the market... the Zalman CNPS9500-LED.

So at idle with my max stable overclock, the temp is ~42C and under maximum strain it's ~49C . Is that good? For once I did not use Arctic Silver 5 - and I used Zalman's thermal paste. Would I be better off with AS5?
 
Temp seems a bit high for my tastes. First of all, what IS this max stable overclock? (including what voltage you are throwing at it) How is your case airflow? A pic would help with that one. What motherboard are you using? Some are well known to report off temperatures. Try and give us some more info, and we could better answer the question.
 
Thats a tad high for Claws. Clawhammer CPUs run at 1.5V which will give a usual heat output in room temperature of ~72 F of 38 Idle, 46 Load.
 
iSkylla said:
Thats a tad high for Claws. Clawhammer CPUs run at 1.5V which will give a usual heat output in room temperature of ~72 F of 38 Idle, 46 Load.
you hav to remember that he is overclocked tho
 
Yeah, those temps seem fine if you've overvolted it significantly. As long as the thing is stable, then you should be alright.

If you're looking to one-up your current cooling solution though, the scythe ninja or thermaltake big typhoon are your best bets.
 
Back
Top